Viking Husqvarna 190 Sewing Machine Manual

The Viking Husqvarna 190 is a versatile mechanical sewing machine featuring straight stitch, zigzag stitch, buttonhole function, free arm capability, built-in needle threader, stitch length and width adjustment, reverse sewing, and drop feed for free-motion sewing. Powered by 120V AC, this machine is ideal for beginners and intermediate sewers with its user-friendly controls and reliable performance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with free arm, built-in needle threader, stitch selection dial, tension control, bobbin winder, and accessory storage.

Feature	Description
Stitch Selection Dial	Selects straight stitch, zigzag, and decorative stitches
Stitch Length Control	Adjusts stitch length from 0-4mm
Stitch Width Control	Adjusts zigzag width from 0-5mm
Reverse Sewing Lever	Reinforces stitches at beginning and end
Built-in Needle Threader	Assists with easy needle threading
Free Arm	For sewing cuffs and tubular items
Drop Feed	Lowers feed dogs for free-motion sewing
Bobbin Winder	Automatically winds bobbin
Thread Tension Dial	Adjusts upper thread tension
Power/Speed Control	Foot pedal controls sewing speed

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Lift carefully from carrying case.
Set up workspace: Place on sturdy table near power outlet.
Connect foot pedal: Plug into machine's foot control port.
Connect to power: Plug power cord into 120V AC outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow threading sequence.

Thread upper thread: Follow numbered guides from spool to needle.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Select stitch: Turn dial to desired stitch pattern.
Adjust settings: Set stitch length and width as needed.
Test sew: Use scrap fabric to check tension and stitch quality.
Practice basic stitches: Straight stitch and zigzag first.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

Machine Type: Mechanical Free Arm Sewing Machine
Stitches: Straight, Zigzag, 4-step Buttonhole, Decorative
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonhole: 4-step manual buttonhole
Needle System: HAx1 standard domestic needles
Bobbin: Class 15 transparent bobbin
Presser Feet: Includes zigzag foot, buttonhole foot, zipper foot
Power Source: 120V AC, 60Hz
Weight: 11 lbs (5 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch Selection Dial, Stitch Length Control, Stitch Width Control, Reverse Lever, Bobbin Winder.

Stitch Selection: Turn dial to select straight, zigzag, or decorative stitches. Stitch Length: 0-4mm (0 for darning, 4 for basting). Stitch Width: 0-5mm (0 for straight stitch, 5 for wide zigzag). Reverse: Hold lever to sew backwards. Tension: Adjust dial for balanced stitches (4 for normal sewing).

Stitch Selection

Available stitches and their applications:

Straight Stitch: Basic sewing, seams (length 2.0-2.5mm)
Zigzag Stitch: Finishing edges, stretch fabrics (width 2-4mm)
3-step Zigzag: Elastic application, mending
Blind Hem: Nearly invisible hems
4-step Buttonhole: Manual buttonhole creation
Decorative Stitches: Shell stitch, multiple zigzag

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

Upper Threading: Raise presser foot, follow numbered guides, use built-in threader.
Bobbin Winding: Place spool on pin, thread through tension disc, wind bobbin.
Bobbin Insertion: Open slide plate, insert bobbin with thread clockwise.
Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you.
Thread Tension: Adjust dial for balanced stitches (normal setting 4).

WARNING! Always raise needle to highest position before threading.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil hook race and moving parts (use sewing machine oil only).
Monthly: Check needle for burrs, replace if damaged.
As needed: Clean exterior with soft, dry cloth.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © Viking Husqvarna; all rights reserved. For technical support and service, contact authorized Viking Husqvarna dealers or visit www.husqvarnaviking.com. Manufactured to meet international quality and safety standards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; reduce tension; check for burrs on needle.
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type; check threading.
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; check bobbin case.
Machine not running	Power connection/foot pedal	Check power cord; ensure foot pedal is plugged in properly.
Uneven stitches	Tension issues	Adjust tension dial; rethread both upper and bobbin threads.
Needle hitting plate	Needle bent/incorrectly inserted	Replace needle; ensure flat side of needle is to the back.

Service: Contact authorized Viking Husqvarna service center for repairs.

Support: www.husqvarnaviking.com or local authorized dealer