Viking 6020 Sewing Machine Manual

The Viking 6020 is a versatile electronic sewing machine featuring 20 built-in stitches, automatic needle threading, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for darning and quilting, built-in LED light, reverse sewing function, and variable speed control. Powered by standard household outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in LED light, free arm, automatic needle threader, stitch selection dial, bobbin winder, foot pedal, accessory storage.

Feature	Description
Built-in stitches	20 different stitch patterns including straight, zigzag, and decorative
Automatic needle threader	Easy threading with push-button mechanism
Free arm capability	Removable extension table for sewing sleeves and cuffs
Drop feed	For darning, quilting, and free-motion sewing
Built-in buttonholer	One-step automatic buttonhole function
LED light	Bright illumination of sewing area
Reverse sewing	Reinforce stitches with reverse button
Variable speed control	Adjustable sewing speed via foot pedal
Stitch length/width	Adjustable settings for customization
Power switch	Main power on/off control

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port and place on floor.
Attach extension table: Snap into place for flatbed sewing.
Wind bobbin: Follow threading diagram for proper bobbin winding.

WARNING! Machine is heavy; lift with both hands. Keep fingers away from needle area during setup.

First-Time Operation

Power on machine; follow initial setup procedure.

Thread machine: Follow numbered threading path on machine.
Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
Select stitch: Turn dial to desired stitch pattern.
Test sew: Use scrap fabric to test stitch and tension settings.
Adjust settings: Modify stitch length and width as needed.

CAUTION! Always turn off power when threading needle or changing accessories.

Specifications

Stitches: 20 built-in patterns
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm
Needle Positions: Left, center, right
Bobbin: Front-loading, class 15 transparent
Lighting: Built-in LED
Speed Control: Variable via foot pedal
Power Source: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)
Warranty: 25-year limited

Controls and Settings

Control Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button, power switch.

Basic Controls: Power switch, stitch selector, length/width adjusters, reverse function, bobbin winder.

Stitch Length: Adjust from 0mm (darning) to 4mm (basting). Stitch Width: Adjust from 0mm (straight stitch) to 5mm (zigzag). Reverse: Hold button to reinforce stitches. Tension: Adjust upper thread tension dial (4-5 for normal sewing).

Stitch Selection

20 built-in stitches including:

Straight stitch (left, center, right needle positions)
Zigzag stitch (various widths)
Blind hem stitch
Stretch stitches
Decorative stitches
Buttonhole stitch (one-step)
Satin stitches
Overcast stitch

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position.
Follow numbered threading path: Spool pin to tension discs to take-up lever.
Use automatic needle threader: Push down and hook thread through needle.
Wind bobbin: Place thread on spool pin, through bobbin winder tension.
Insert bobbin: Drop into case with thread pulling counterclockwise.

WARNING! Ensure machine is off during threading. Keep fingers clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint: Remove needle plate and clean bobbin area after each project.
Oil machine: Apply sewing machine oil to designated points every 3-6 months.
Needle replacement: Change needle after 8-10 hours of sewing.
Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories:

Standard presser foot
Zipper foot
Buttonhole foot
Darning/embroidery foot
Seam ripper/lint brush
Extra needles (size 14)
Empty bobbins (4)
Screwdriver
Spool caps

Safety Information

Important safety precautions for operation.

Always disconnect power when not in use
Keep fingers away from moving needle
Do not sew over pins
Use proper needle for fabric type
Ensure adequate lighting
Keep work area clean and organized
Supervise children near operating machine

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for burrs on needle.
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric.
Uneven stitches	Incorrect tension	Adjust upper tension; reinsert bobbin properly.
Machine not running	Power/pedal issues	Check power connection; ensure pedal is plugged in.
Needle threader not working	Needle position/thread	Raise needle to highest position; ensure thread is in hook.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure.

Service: Contact authorized Viking service center for repairs.

Support: 1-800-358-0001; www.husqvarnaviking.com