Usha Tailor Super Deluxe Sewing Machine Manual

The Usha Tailor Super Deluxe is a high-performance sewing machine designed for professional tailors and home sewing enthusiasts. This versatile machine features multiple stitch patterns, automatic thread tension control, built-in LED light, reverse stitching capability, free arm design for cylindrical sewing, adjustable stitch length and width, drop feed for darning and quilting, and comes with various presser feet and accessories. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch patterns, automatic bobbin winding, free arm conversion, LED work light, foot pedal control.

Installation

Unpack and inspect contents. Place on stable sewing table.

1. Assemble machine head: Remove protective packaging and place on sewing table.
2. Install foot pedal: Connect pedal cable to machine port.
3. Connect power: Plug power cord into electrical outlet.
4. Attach accessories: Install presser foot and needle as per instructions.
5. Thread machine: Follow threading diagram for upper and lower threading.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure before powering on.

First-Time Setup

Power on machine; follow setup procedures.

1. Needle installation: Loosen needle clamp screw, insert needle with flat side facing back.
2. Bobbin winding: Place thread on spool pin, wind bobbin using bobbin winder.
3. Upper threading: Follow numbered threading path from spool to needle.
4. Lower threading: Insert bobbin into bobbin case with thread running counterclockwise.
5. Test stitching: Use scrap fabric to test stitch quality and tension.

CAUTION! Ensure stable surface; keep fingers away from moving needle during operation.

Specifications

• Machine Type: Electric Sewing Machine
• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Speed: Up to 800 stitches per minute
• Buttonhole: 1-step automatic
• Presser Feet: 6 included (standard, zipper, buttonhole, etc.)
• Needle System: HA-1 standard needles
• Power Requirements: 110-220V AC, 60W
• Weight: 7.5 kg
• Warranty: 2 years limited warranty

Controls and Settings

Access controls via front panel and dials. Stitch Selection Dial: Choose from 12 stitch patterns. Stitch Length Dial: Adjust stitch length (0-4mm). Stitch Width Dial: Adjust stitch width for zigzag and decorative stitches.

Additional Controls: Reverse Stitch Button, Bobbin Winder, Thread Tension Dial, Presser Foot Lever, Hand Wheel.

Stitch Settings: Straight stitch (position 1), Zigzag stitch (position 2-5), Decorative stitches (position 6-12). Tension: Adjust thread tension dial (2-6 for normal fabrics). Feed Dogs: Lower for darning and free-motion sewing.

Connecting Accessories

Presser Feet: Snap-on system for quick changes. Needles: Standard HA-1 system. Bobbins: Plastic class 15 bobbins.

1. Turn off machine before changing accessories.
2. Presser foot installation: Lift presser foot lever, align foot with bar, lower lever to lock.
3. Needle replacement: Ensure flat side of needle faces backward in clamp.
4. Bobbin insertion: Follow directional arrows in bobbin case.

Tip: Always use genuine Usha accessories for optimal performance.

Basic Sewing Operations

Supports various fabrics from light silk to heavy denim.

1. Straight stitching: Select stitch pattern 1, adjust length as needed.
2. Zigzag stitching: Select patterns 2-5 for finishing edges and stretch fabrics.
3. Reverse stitching: Press reverse button to secure seam ends.
4. Buttonhole making: Use automatic buttonhole foot and pattern.
5. Zipper insertion: Install zipper foot for invisible zipper application.
6. Gathering: Use longer stitch length and pull bobbin thread.
7. Free arm sewing: Remove accessory tray for cylindrical items.

WARNING! Never pull fabric while sewing; let feed dogs move fabric naturally.

Advanced Functions

Decorative Stitches: Patterns 6-12 for embellishments. Darning and Quilting: Lower feed dogs for free-motion work. Blind Hem: Use blind hem foot and appropriate stitch pattern.

Care & Cleaning

Unplug before cleaning. Remove lint and dust regularly from bobbin area and feed dogs.

1. Daily: Brush lint from bobbin case and needle area.
2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
3. Monthly: Clean feed dogs with small brush.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil; never use household oils. Keep machine away from moisture.

Regulatory Information

CE Certified: Complies with European safety standards. ISO 9001: Quality management system certified. Copyright © 2025 Usha International; trademarks of Usha International Ltd. For support, visit www.ushasew.com or contact 1-800-123-4567.

Troubleshooting

Service: 1-800-123-4567; www.ushasew.com