Toyota Sewing Machine STF39 Manual

The Toyota STF39 is a versatile household sewing machine featuring 39 built-in stitches, one-step buttonhole function, automatic needle threader, drop-in bobbin system, free arm capability, adjustable stitch length and width, built-in LED light, and multiple presser feet. Powered by standard household electricity with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Main body with stitch selection dial, Bobbin case, Presser foot, Needle area, Thread guides, Foot pedal, Power cord.

FeatureDescription
Stitch selection dialSelects from 39 built-in stitches including utility and decorative
Automatic needle threaderEasy threading with push-pull mechanism
Drop-in bobbin systemTop-loading bobbin with clear cover
One-step buttonholeAutomatic buttonhole creation
Free arm capabilityRemovable extension table for cylindrical sewing
LED work lightBuilt-in illumination for sewing area
Stitch length dialAdjusts stitch length from 0-4mm
Stitch width dialAdjusts stitch width from 0-5mm
Reverse stitch buttonReinforces stitching at beginning and end
Foot pedal controlVariable speed control via foot pedal

Unpacking and Setup

Carefully unpack all components and place on stable surface.

  1. Remove machine from packaging: Lift from carrying case, remove protective materials.
  2. Set up work area: Place on sturdy table at comfortable height.
  3. Connect power: Plug power cord into machine and wall outlet.
  4. Install foot pedal: Place pedal on floor in comfortable position.
  5. Attach accessories: Install standard presser foot and needle.

WARNING! Machine is heavy; lift with proper technique. Ensure stable work surface.

First-Time Operation

Power on machine; follow setup procedure.

  1. Thread machine: Follow threading diagram from spool to needle.
  2. Wind bobbin: Use built-in bobbin winder with selected thread.
  3. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
  4. Select stitch: Turn dial to desired stitch pattern.
  5. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from moving needle. Always turn off when not in use.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button, Power switch.

Stitch Selection: Turn dial to select from 39 patterns. Stitch Length: Adjust for fabric type (shorter for delicate, longer for heavy). Stitch Width: Adjust for decorative stitches and zigzag. Tension Control: Upper thread tension dial (2-6 for normal fabrics). Presser Foot Pressure: Adjustable for different fabric thicknesses.

Stitch Selection

39 built-in stitches including straight, zigzag, stretch, and decorative patterns.

  1. Straight Stitch: Position 1-3 for basic sewing
  2. Zigzag Stitch: Position 4-6 for finishing edges
  3. Blind Hem: Position 7 for invisible hems
  4. Elastic Stitch: Position 8-10 for stretch fabrics
  5. Decorative: Position 11-39 for embellishments
  6. Buttonhole: Special position for automatic buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation and quality stitches.

  1. Raise needle: Turn handwheel to highest position.
  2. Place spool: Put thread spool on holder.
  3. Follow guides: Thread through all guides to needle.
  4. Use needle threader: Push lever down and hook thread through.
  5. Wind bobbin: Place empty bobbin on winder, guide thread, press pedal.
  6. Insert bobbin: Drop into case with thread pulling counterclockwise.

WARNING! Ensure machine is off during threading. Keep fingers clear of needle area.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Daily: Remove lint from bobbin area and feed dogs
  2. Weekly: Oil moving parts with sewing machine oil
  3. Monthly: Clean race hook and surrounding mechanisms
  4. As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with STF39 model.

AccessoryPurpose
Standard Presser FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootCreating buttonholes
Blind Hem FootInvisible hemming
Bobbin (3)Extra bobbins for thread colors
Needles (5)Assorted needle sizes
Seam RipperRemoving stitches
BrushCleaning lint
ScrewdriverAdjustments and maintenance

Safety Information

Important safety precautions for safe operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Needle breaksWrong needle/bent needleReplace with correct needle type; ensure straight insertion
Thread bunchingIncorrect threading/tensionRe-thread completely; adjust upper and lower tension
Skipped stitchesDull needle/wrong needleReplace needle; use correct needle for fabric type
Machine jamsLint buildup/thread tangleClean bobbin area; remove tangled thread
Uneven feedingPresser foot pressureAdjust presser foot pressure for fabric thickness
No powerPower connection/fuseCheck power cord connection; verify outlet function

Service: Contact authorized Toyota service center for major repairs.

Support: www.toyotasewing.com or 1-800-555-TOYOTA

Toyota Sewing Machine STF39 Manual © - All Rights Reserved 2025