tailor sewing machine model 834 manual

The Tailor Sewing Machine Model 834 is a versatile household sewing machine designed for various fabric types, featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, drop-in bobbin system, free arm capability, LED lighting, and foot pedal control. Powered by 110-120V AC, this machine is ideal for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Care 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Sewing head with built-in stitch patterns, Foot pedal, Power cord, Bobbin case, Needle set, Various presser feet.

FeatureDescription
Stitch patterns23 built-in stitches including straight, zigzag, decorative
Stitch length controlAdjustable from 0-4mm
Stitch width controlAdjustable from 0-5mm
Built-in needle threaderAutomatic needle threading assistance
Drop-in bobbin systemTop-loading bobbin with clear cover
Free arm capabilityConvertible for sewing sleeves and cuffs
LED work lightBuilt-in illumination for sewing area
Reverse stitch buttonFor reinforcing seams
Foot pedal controlVariable speed control
Power switchMain power on/off control

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

  1. Remove protective packaging and foam inserts.
  2. Attach power cord to machine and plug into wall outlet.
  3. Install foot pedal and connect to machine.
  4. Install needle: Loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
  5. Wind bobbin: Place empty bobbin on winder, thread through tension disc, press foot pedal.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow threading guide printed on machine.

  1. Thread upper thread: Follow numbered guide from spool pin to needle.
  2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
  3. Bring up bobbin thread: Hold upper thread, turn hand wheel toward you.
  4. Select stitch: Turn stitch selection dial to desired pattern.
  5. Test sew: Place fabric under presser foot, lower foot, press pedal gently.

CAUTION! Always start with scrap fabric to test settings.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch button, Power switch.

Stitch Selection: Turn dial to select from 23 patterns (straight, zigzag, stretch, decorative). Stitch Length: Adjust for fabric thickness (0-4mm). Stitch Width: Adjust for zigzag and decorative stitches (0-5mm). Reverse: Hold button for backstitching. Tension: Adjust upper thread tension dial (3-5 for normal fabrics).

Stitch Selection

Choose appropriate stitch for your project:

  1. Straight stitch (1-4): Basic sewing, topstitching, basting
  2. Zigzag stitch (5-8): Seam finishing, appliqué, stretch fabrics
  3. Decorative stitches (9-18): Ornamental sewing, hems
  4. Buttonhole stitch (19-20): Automatic one-step buttonholes
  5. Blind hem stitch (21): Nearly invisible hemming
  6. Overcast stitch (22-23): Seam finishing to prevent fraying

Tip: Test stitch on fabric scrap before starting project.

Threading & Bobbin

Proper threading ensures smooth operation.

  1. Upper threading: Follow numbered guide - spool pin, thread guides, tension discs, take-up lever, needle.
  2. Bobbin winding: Place spool on pin, thread through guide, wrap around bobbin, engage winder.
  3. Bobbin insertion: Drop bobbin into case with thread unwinding counterclockwise.
  4. Bring up bobbin thread: Hold upper thread, turn hand wheel slowly.
  5. Needle threading: Use built-in threader by pushing lever down and forward.

WARNING! Always raise needle to highest position before threading.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Clean lint buildup: Remove needle plate and bobbin case, brush out lint.
  2. Oil moving parts: Use sewing machine oil on hook race and moving mechanisms.
  3. Needle replacement: Change needle every 8-10 hours of sewing.
  4. Storage: Cover machine when not in use, store in dry area.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories for various sewing tasks.

AccessoryPurpose
All-purpose footGeneral sewing
Zipper footInstalling zippers
Buttonhole footCreating buttonholes
Blind hem footNearly invisible hems
Seam ripperRemoving stitches
BrushCleaning lint
Extra needlesVarious sizes for different fabrics
Bobbin (4)Extra bobbins for thread colors

Safety Information

FCC Part 15: Class B digital device; complies with interference limits. Always disconnect power before changing needles or cleaning. Keep hands away from moving parts. Do not operate with damaged cord. Copyright © 2025 Tailor Sewing Machines; all rights reserved. For support, visit www.tailorsewing.com or contact 1-800-555-8340.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot pedal is connected; check power switch.
Thread breakingTension/thread qualityReduce tension; use better quality thread; check for burrs on needle.
Skipped stitchesNeedle/thread mismatchChange needle; ensure correct needle for fabric; rethread machine.
Bobbin thread bunchingBobbin threadingRethread bobbin; ensure bobbin inserted correctly; clean bobbin area.
Uneven stitchesTension settingsAdjust upper and bobbin tension; check threading path.
Machine jamsThread buildupRemove needle plate; clean lint and thread fragments; oil if necessary.

Service: 1-800-555-8340; www.tailorsewing.com

Tailor Sewing Machine Model 834 Manual © - All Rights Reserved 2025