Sunbeam Sewing Machine SB1800 Manual

The Sunbeam SB1800 is a versatile electronic sewing machine featuring 180 built-in stitches, automatic needle threader, one-step buttonhole, adjustable stitch length and width, free arm capability, LED lighting, top drop-in bobbin system, and multiple presser feet. Powered by 120V AC, this machine is suitable for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, automatic needle threader, free arm, LED work light, accessory compartment, foot pedal, power cord.

Feature	Description
Built-in stitches	180 stitch patterns including utility, decorative, and stretch stitches
Automatic needle threader	Easy threading with push-button mechanism
One-step buttonhole	Automatically creates perfect buttonholes
Free arm capability	For sewing cuffs, sleeves, and other tubular items
Top drop-in bobbin	Easy bobbin loading with clear cover
LED work light	Bright illumination of sewing area
Stitch length/width control	Adjustable from 0-4mm length and 0-5mm width
Presser feet	Includes all-purpose, zipper, buttonhole, and button sewing feet
Reverse stitch	Reinforce seams with reverse sewing
Speed control	Adjustable sewing speed with foot pedal

Unpacking and Setup

Carefully unpack all components and place on stable surface.

Remove machine from packaging: Lift by carrying handle, not by accessories.
Attach foot pedal: Connect to machine port at right front.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Place empty bobbin on winder, thread through tension disc.

WARNING! Machine is heavy; lift with care. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Use automatic needle threader or manual threading path.
Insert bobbin: Place wound bobbin in bobbin case with thread counterclockwise.
Select stitch: Choose desired stitch pattern using control dial.
Adjust settings: Set stitch length and width as needed.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always turn off power when changing needles or cleaning machine.

Specifications

Stitch Selection: 180 built-in stitches
Buttonholes: One-step automatic
Needle Threading: Automatic push-button system
Bobbin System: Top drop-in with clear cover
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable 0-5mm
Lighting: LED work light
Free Arm: Yes, removable accessory tray
Power Source: 120V AC, 60Hz
Included Accessories: 4 presser feet, needles, bobbins, seam ripper, brush

Controls and Settings

Control Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse button, automatic needle threader.

Basic Controls: Power switch, foot pedal speed control, reverse stitch button, stitch pattern selector.

Stitch Length: 0-4mm adjustment for different fabric types. Stitch Width: 0-5mm for zigzag and decorative stitches. Tension: Automatic thread tension with manual override. Needle Position: Manual needle up/down control.

Stitch Selection

180 stitches including straight, zigzag, stretch, decorative, and quilting stitches.

Turn stitch selection dial to desired pattern number.
Adjust stitch length for fabric weight (shorter for lightweight, longer for heavy).
Set stitch width for zigzag and decorative patterns.
Test stitch on scrap fabric before sewing project.
Use reverse button to secure beginning and end of seams.

Tip: Refer to stitch guide chart for recommended settings for different fabrics.

Threading and Bobbin

Upper Threading:

Raise presser foot and needle to highest position.
Place spool on spool pin, thread through guides.
Use automatic needle threader or thread needle manually.

Bobbin Winding:

Place empty bobbin on winder spindle.
Thread through bobbin winding tension disc.
Push bobbin winder to engage, press foot pedal.
Stop when bobbin is full, cut thread and return winder.

WARNING! Always use same thread type in bobbin and needle for best results.

Maintenance & Cleaning

Unplug machine before maintenance. Clean lint from bobbin area regularly. Oil moving parts as specified in manual.

CAUTION! Use only sewing machine oil. Do not spray cleaners directly on machine.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot pedal is plugged in.
Thread breaking	Tension/thread quality	Check thread tension; use quality thread; rethread machine.
Uneven stitches	Threading/tension	Rethread upper and bobbin threads; adjust tension settings.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct needle for fabric type.
Bobbin thread bunching	Bobbin threading	Remove and reinsert bobbin; ensure correct threading direction.

Reset: Turn machine off and on to reset electronic controls.

Service: 1-800-555-1234; www.sunbeam.com