Singer Sewing Machine with Manual Foot Pedal

The Singer Sewing Machine with Manual Foot Pedal is a classic mechanical sewing machine featuring a manual foot pedal control system, sturdy metal construction, adjustable stitch length and tension controls, built-in bobbin winder, reverse stitching capability, and multiple presser feet options. Designed for durability and precision sewing, it operates with standard household power and includes essential accessories for basic to intermediate sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing head, Manual Foot Pedal, Stitch Length Dial, Tension Control, Bobbin Winder, Reverse Stitch Lever, Presser Foot Lever, Built-in Light.

Installation & Setup

Unpack and inspect all components. Place on stable sewing table.

1. Position machine: Place on flat, stable surface at comfortable height.
2. Connect foot pedal: Plug foot pedal cable into machine port.
3. Connect power: Plug power cord into wall outlet (120V AC).
4. Install needle: Loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
5. Install bobbin: Remove bobbin case, insert bobbin with thread unwinding counterclockwise.

WARNING! Keep fingers away from needle area during setup. Ensure machine is unplugged when installing needle.

First-Time Operation

Power on machine; test basic functions.

1. Thread upper thread: Follow numbered threading path on machine.
2. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
3. Test stitch: Place fabric under presser foot, lower foot, gently press foot pedal.
4. Adjust tension: Test on scrap fabric; adjust tension dial if stitches are loose or tight.
5. Practice control: Use foot pedal to practice starting, stopping, and controlling speed.

CAUTION! Always start with slow pedal pressure. Keep hands clear of moving needle.

Specifications

• Machine Type: Mechanical Sewing Machine
• Power Control: Manual Foot Pedal
• Stitch Length: Adjustable 0-4mm
• Stitch Options: Straight stitch, zigzag (depending on model)
• Max Sewing Speed: Up to 800 stitches per minute
• Needle System: 15x1 Haushalt/HAx1
• Bobbin Type: Class 15 transparent bobbin
• Presser Feet: Standard, zipper, buttonhole (included)
• Power Requirements: 120V AC, 60Hz
• Weight: Approximately 15 lbs

Controls and Settings

Primary controls located on machine body and foot pedal.

Machine Controls: Stitch Length Dial, Tension Control, Reverse Lever, Presser Foot Lever, Hand Wheel, Power Switch.

Foot Pedal: Speed control through foot pressure - light pressure for slow sewing, firm pressure for faster sewing.

Stitch Adjustment: Turn stitch length dial for longer/shorter stitches. Tension Control: Adjust for different fabric types (lower for stretch fabrics, higher for woven fabrics). Reverse Stitching: Hold reverse lever to sew backwards for securing stitches.

Threading the Machine

Proper threading is essential for smooth operation.

1. Raise presser foot and needle to highest position.
2. Place spool on spool pin.
3. Follow numbered threading path: Through first thread guide, around tension discs, through take-up lever, down to needle.
4. Thread needle from front to back.
5. Pull about 4 inches of thread toward back of machine.
6. Pull up bobbin thread by turning hand wheel toward you.

Tip: Always thread with presser foot raised to ensure proper tension disc engagement.

Basic Sewing Techniques

Master these fundamental sewing skills.

1. Starting to sew: Position fabric, lower presser foot, gently press foot pedal to begin.
2. Straight stitching: Guide fabric gently, let feed dogs move fabric.
3. Reverse stitching: Hold reverse lever at beginning and end of seam.
4. Turning corners: Stop with needle down in fabric, lift presser foot, pivot fabric.
5. Finishing: Reverse stitch, lift presser foot, pull fabric back to cut threads.
6. Adjusting speed: Practice varying foot pressure for different sewing speeds.

WARNING! Never pull fabric through machine - let feed dogs advance fabric naturally.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts according to manual instructions.
3. Monthly: Clean foot pedal mechanism and check electrical cord.
4. Needle replacement: Change needle after every 8 hours of sewing.

CAUTION! Always unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories Included

• Standard Presser Foot
• Zipper Foot
• Buttonhole Foot
• Class 15 Bobbins (3)
• Needles (assorted sizes)
• Seam Ripper
• Brush for cleaning
• Screwdriver for adjustments
• Spool Caps

Safety Information

Important safety precautions for safe operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle
• Do not operate with damaged power cord
• Use proper lighting to see sewing area clearly
• Keep hair and loose clothing away from moving parts
• Store foot pedal securely when not in use
• Supervise children and beginners closely

EMERGENCY: In case of electrical issues, immediately unplug machine.

Troubleshooting

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com