Singer Sewing Machine Futura II Model 920 Manual

The Singer Futura II Model 920 is a computerized sewing and embroidery machine featuring automatic needle threading, built-in embroidery designs, LCD display, automatic thread cutter, adjustable stitch length and width, multiple presser feet, free arm capability, automatic buttonholes, and built-in memory for custom designs. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, automatic needle threader, embroidery unit, bobbin winder, stitch selection dial, speed control slider, presser foot lever.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot controller: Plug into machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Attach accessories: Install presser foot, needle, and bobbin.
5. Thread machine: Follow threading guide printed on machine.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Thread machine: Use automatic needle threader for top thread.
2. Wind bobbin: Place bobbin on winder and follow threading path.
3. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
4. Select stitch: Turn dial to desired stitch pattern.
5. Test sew: Use scrap fabric to test stitch quality and tension.
6. Adjust settings: Modify stitch length and width as needed.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

Specifications

• Machine Type: Computerized Sewing and Embroidery
• Stitches: 200+ built-in stitches including utility, decorative, and quilting
• Embroidery Designs: 80+ built-in designs with 5 lettering fonts
• Needle System: HAx1 sewing needle 130/705 H
• Bobbin: Class 15 transparent bobbin
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable 0-7mm
• Maximum Speed: 750 stitches per minute
• Power Source: 120V AC, 60Hz
• Display: LCD with backlight

Controls and Functions

Access functions via control panel buttons and dials. Front Panel: Power switch, stitch selection dial, reverse stitch button, needle up/down button.

Control Panel: LCD display, stitch pattern buttons, embroidery design selector, memory buttons, automatic thread cutter, speed control slider.

Stitch Settings: Length adjustment, width adjustment, mirror image, stitch elongation. Embroidery: Design selection, size adjustment, color sequence, editing functions. Utility: Reverse stitch, needle position, bobbin winding, automatic threading.

Stitch Selection and Settings

Select from utility, decorative, stretch, and buttonhole stitches.

1. Turn stitch selection dial to desired category.
2. Use arrow buttons to select specific stitch pattern.
3. Adjust stitch length using length adjustment button.
4. Adjust stitch width using width adjustment button.
5. Test stitch on scrap fabric before sewing project.
6. Use reverse stitch button to secure beginnings and endings.

Tip: Always test stitch settings on similar fabric before starting your project.

Embroidery Functions

Built-in embroidery designs with editing capabilities.

1. Attach embroidery unit: Slide onto machine until it clicks.
2. Hoop fabric: Use embroidery hoop with stabilizer.
3. Select design: Browse designs using arrow buttons.
4. Adjust size: Use resize buttons to make design larger or smaller.
5. Thread colors: Follow on-screen color sequence.
6. Start embroidery: Press start button and monitor progress.
7. Change colors: Machine will stop automatically for color changes.
8. Save designs: Use memory function to store custom designs.

WARNING! Always use stabilizer for embroidery. Keep hands away from moving embroidery unit.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

1. Clean lint: Remove bobbin case and clean lint after each project.
2. Oil machine: Apply sewing machine oil to designated points monthly.
3. Change needle: Replace needle after 8-10 hours of sewing.
4. Clean exterior: Use soft, dry cloth only.
5. Store properly: Cover machine when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only Singer-approved accessories and oil.

Accessories Included

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Singer Manufacturing Company; trademarks of Singer Licensing Company. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.