Singer Sewing Machine 4562 Manual

The Singer Sewing Machine 4562 is a versatile mechanical sewing machine featuring 32 built-in stitches, 4-step buttonhole, adjustable stitch length and width, free arm capability, built-in needle threader, top drop-in bobbin system, adjustable presser foot pressure, and built-in LED light. Powered by 120V AC, this machine is ideal for basic sewing, garment construction, and home decor projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Techniques 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with 32 stitches, free arm, built-in needle threader, LED light, and accessory storage.

Feature	Description
Built-in Stitches	32 stitches including straight, zigzag, decorative, and stretch stitches
4-Step Buttonhole	Easy buttonhole creation in four simple steps
Free Arm	Converts for sewing cuffs, sleeves, and other cylindrical items
Built-in Needle Threader	Automatic needle threading for easy setup
Top Drop-in Bobbin	Easy bobbin loading with clear cover
Adjustable Stitch Length	0-4mm stitch length adjustment
Adjustable Stitch Width	0-5mm stitch width adjustment
LED Light	Built-in illumination for sewing area
Reverse Stitch	Button for reinforcing stitches
Accessory Storage	Built-in compartment for accessories

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Install foot controller: Plug into machine port, place on floor.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side toward back.
Wind bobbin: Follow bobbin winding instructions in manual.
Thread machine: Follow threading diagram on machine.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

Select straight stitch: Turn stitch selector to position 1.
Set stitch length: Adjust to 2.5mm for medium stitches.
Practice on scrap fabric: Use two layers of medium-weight fabric.
Test reverse: Hold reverse button to reinforce stitches.
Try zigzag: Select zigzag stitch and test on fabric.

CAUTION! Always turn handwheel toward you. Never force the machine.

Specifications

Stitches: 32 built-in stitches
Buttonhole: 4-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Speed: Up to 750 stitches per minute
Presser Feet: All-purpose, zipper, buttonhole, button sewing feet included
Bobbin: Class 15 transparent bobbin
Needles: Singer system 130/705H needles
Power Source: 120V AC, 60Hz
Weight: 12.3 lbs (5.6 kg)

Controls and Settings

Main controls: Stitch selector, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select desired stitch pattern (1-32).

Stitch Length: Adjust for shorter or longer stitches (0-4mm).

Stitch Width: Adjust for narrower or wider zigzag stitches (0-5mm).

Reverse Stitch: Press and hold to sew in reverse for reinforcement.

Tension Control: Adjust thread tension dial (usually set at 4).

Stitch Selection

32 stitches include: Straight, zigzag, blind hem, stretch, and decorative stitches.

Straight Stitch (1): Basic sewing, topstitching
Zigzag Stitch (2-4): Seam finishing, appliqué
Blind Hem (5): Nearly invisible hemming
Stretch Stitches (6-8): Knits and stretch fabrics
Decorative Stitches (9-32): Embellishment and special effects

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Techniques

Follow these steps for successful sewing:

Raise presser foot and insert fabric.
Lower presser foot and hold thread tails.
Start sewing slowly, then increase speed.
Guide fabric gently - don't push or pull.
Use reverse at beginning and end of seams.
Raise needle and presser foot to remove fabric.

WARNING! Keep fingers away from moving needle. Always watch the needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint regularly: Remove needle plate and clean bobbin area.
Oil machine: Use sewing machine oil on moving parts as directed.
Change needles: Replace needle after 8-10 hours of sewing.
Check belt tension: Ensure proper motor belt tension.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included:

All-purpose foot
Zipper foot
Buttonhole foot
Button sewing foot
Seam ripper/lint brush
Needles (assorted sizes)
Bobbins (4)
Screwdriver
Spool pin felt

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © 2024 Singer Manufacturing Company. All rights reserved. For technical support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread machine; adjust tension; check for burrs on needle.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct size for fabric.
Uneven stitches	Incorrect tension/threading	Check threading; adjust tension; clean machine.
Machine won't run	Power/pedal issue	Check power connection; ensure pedal is plugged in.
Fabric not feeding	Presser foot pressure	Adjust presser foot pressure; clean feed dogs.

Reset: Unplug machine for 30 seconds, then restart.

Service: 1-800-4-SINGER; www.singer.com