Singer Sewing Machine 2932 Manual

The Singer Sewing Machine 2932 is a versatile household sewing machine featuring 32 built-in stitches, automatic needle threader, adjustable stitch length and width, built-in buttonhole, free arm capability, drop feed for darning and quilting, top drop-in bobbin system, and multiple presser feet. Powered by 110V AC, this machine is ideal for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 32 built-in stitches, automatic needle threader, free arm, drop feed, top drop-in bobbin, multiple presser feet, built-in buttonhole.

Feature	Description
Built-in Stitches	32 stitches including decorative, stretch, and utility stitches
Automatic Needle Threader	Easy threading with push-button mechanism
Free Arm	For sewing cuffs, sleeves, and other tubular items
Drop Feed	For darning, quilting, and free-motion sewing
Top Drop-in Bobbin	Easy bobbin loading with clear view window
Built-in Buttonhole	One-step automatic buttonhole
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable up to 5mm
Reverse Stitch	For reinforcing seams
Power Switch	Main power on/off control

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Attach foot control: Plug into machine front port.
Install needle: Loosen needle clamp screw, insert needle with flat side toward back.
Connect power: Plug power cord into machine and wall outlet.
Attach accessories: Install presser foot, thread spool pin.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow threading diagram.

Thread upper thread: Follow numbered path on machine; use automatic needle threader.
Wind bobbin: Place empty bobbin on winder, thread through tension disc, press foot control.
Insert bobbin: Drop bobbin into case with thread moving counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch and tension settings.

CAUTION! Always start with needle at highest position. Keep work area well-lit.

Specifications

Stitches: 32 built-in stitches
Buttonhole: One-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm adjustable
Bobbin: Top drop-in, Class 15 transparent
Needle: Singer system 130/705H
Presser Feet: All-purpose, zipper, buttonhole, button sewing
Power Source: 110V AC, 60Hz
Speed: Up to 750 stitches per minute
Warranty: 25-year limited warranty

Controls and Settings

Main controls: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selection: Turn dial to select from 32 built-in stitches. Stitch Length: Adjust for fabric type (shorter for delicate, longer for heavy). Stitch Width: Adjust zigzag and decorative stitches. Reverse: Hold button for backstitching. Tension: Adjust thread tension dial (4-5 for normal sewing).

Stitch Selection

32 stitches include: straight stitch, zigzag, stretch stitches, decorative stitches, blind hem, satin stitches.

Straight Stitch: For basic sewing, topstitching (position 1)
Zigzag: For finishing edges, appliqué (position 2-4)
Blind Hem: For nearly invisible hems (position 5)
Decorative: For embellishments (positions 6-15)
Stretch: For knit fabrics (positions 16-20)
Buttonhole: One-step automatic (position 21)

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Upper threading and bobbin winding procedures.

Upper Threading: Raise presser foot, follow numbered path, use needle threader.
Bobbin Winding: Place spool on pin, thread through guides, place bobbin on winder, press foot control.
Bobbin Insertion: Open cover, drop bobbin in case, pull thread through slot.
Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you until bobbin thread appears.

WARNING! Ensure presser foot is raised when threading. Never force controls.

Maintenance & Cleaning

Unplug before maintenance. Clean lint from bobbin area regularly. Oil as instructed in manual.

Weekly: Remove lint from bobbin case and feed dogs. Monthly: Clean race hook area. As Needed: Replace needle after 8-10 hours of sewing. Annual: Professional servicing recommended.

CAUTION! Use only Singer recommended needles and bobbins. Do not use compressed air for cleaning.

Regulatory Information

UL Listed: Complies with UL 1278 standard. FCC Part 15: Class B digital device. Copyright © 2024 Singer Manufacturing Company. All rights reserved. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord; ensure foot control plugged in; check power switch.
Thread breaking	Tension/thread quality	Rethread machine; check tension setting; use quality thread.
Uneven stitches	Threading/tension	Rethread upper and bobbin threads; adjust tension; check needle.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure.
Needle breaking	Bent needle/wrong size	Replace needle; ensure correct size for fabric; don't pull fabric.
Bobbin thread bunching	Bobbin threading	Rethread bobbin; ensure bobbin inserted correctly.

Service: 1-800-4-SINGER; www.singer.com