singer sewing machine 247 manual free

The Singer 247 is a versatile mechanical sewing machine designed for home use, featuring straight stitch, zigzag stitch, and multiple decorative stitches. This manual covers operation, maintenance, and troubleshooting for this reliable sewing companion. Below are key sections covering features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. Basic Operation 4. Stitch Selection Guide 5. Threading Instructions 6. Bobbin Winding 7. Maintenance and Cleaning 8. Troubleshooting Common Issues 9. Accessories and Parts 10. Technical Specifications

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, reverse stitch function, free arm capability, and adjustable stitch length/width.

Feature	Description
Built-in Stitches	23 built-in stitches including straight, zigzag, and decorative
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable up to 5mm for zigzag stitches
Free Arm	Convertible for sewing cuffs and sleeves
Reverse Stitch	For reinforcing seams
Drop Feed	For free-motion sewing and darning
Built-in Buttonhole	4-step buttonhole function
Bobbin System	Top-loading with clear cover
Tension Control	Adjustable upper thread tension
Presser Feet	Multiple feet included for different applications

Installation and Setup

Unpack and inspect all components. Place on stable surface at comfortable working height.

Remove machine from packaging and remove all protective materials
Place machine on sturdy table or sewing cabinet
Connect foot control pedal to machine
Plug power cord into electrical outlet
Install needle following proper orientation
Wind and install bobbin
Thread upper thread following numbered guides

WARNING! Always unplug machine when not in use or when performing maintenance. Keep fingers away from moving needle.

Basic Operation

Power on machine; adjust settings for your project.

Select stitch: Turn stitch selection dial to desired pattern
Adjust stitch length: Set appropriate length for fabric type
Adjust stitch width: For zigzag and decorative stitches
Position fabric: Lower presser foot before sewing
Start sewing: Gently press foot control
Reverse: Hold reverse lever to reinforce stitches
Finish: Raise needle to highest position before removing fabric

CAUTION! Never force the machine. If it doesn't sew smoothly, check for threading errors or needle issues.

Stitch Selection Guide

Straight Stitch: For basic seams - use length 2.0-2.5mm
Zigzag Stitch: For finishing edges and stretch fabrics
Blind Hem: Use with blind hem foot for invisible hems
Elastic Stitch: For sewing elastic and stretch fabrics
Decorative Stitches: Numbers 4-23 for embellishments
Buttonhole: 4-step process for perfect buttonholes
Basting Stitch: Use longest stitch length for temporary seams

Threading Instructions

Proper threading is essential for good stitch quality.

Raise presser foot and raise needle to highest position
Place spool on spool pin
Follow numbered threading guides on machine
Pass thread through tension discs
Thread take-up lever from right to left
Pass thread through needle bar guide
Thread needle from front to back
Pull about 6 inches of thread under presser foot

Tip: Always thread with presser foot raised to allow thread to seat properly in tension discs.

Bobbin Winding

Use only Singer style bobbins for proper operation.

Place empty bobbin on winder spindle
Pass thread from spool through bobbin winding tension disc
Wind thread around bobbin several times manually
Push bobbin winder to engage winding mechanism
Press foot control to wind bobbin
Stop when bobbin is full (automatically stops on most models)
Cut thread and insert bobbin in case with thread unwinding counterclockwise

WARNING! Do not overwind bobbin. Bobbin should not extend beyond bobbin case edges.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug machine before cleaning
Remove needle plate and clean lint from feed dog area
Clean bobbin area with small brush
Oil machine according to lubrication points in manual
Wipe exterior with soft, dry cloth
Replace needle regularly (every 8-10 hours of sewing)
Check belt tension periodically

CAUTION! Use only sewing machine oil. Never use household oils which can damage the machine.

Troubleshooting Common Issues

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; check for burrs on needle
Skip stitches	Wrong needle type/damaged needle	Replace needle; ensure correct needle for fabric
Bobbin thread bunching	Incorrect bobbin threading	Remove and reinsert bobbin; check bobbin case
Machine won't run	Power connection/foot control	Check power cord; ensure foot control is plugged in
Uneven stitches	Tension issues	Adjust upper tension; check bobbin tension
Noisy operation	Lack of oil/lint buildup	Clean and oil machine; check for loose parts

Reset: Unplug machine for 5 minutes to reset electronic components if applicable.

Service: Contact authorized Singer service center for major repairs.

Accessories and Parts

Standard accessories included with Singer 247:

All-purpose foot
Zipper foot
Buttonhole foot
Blind hem foot
Bobbin (several)
Needles (assorted sizes)
Seam ripper/lint brush
Screwdriver
Spool pin felt

Technical Specifications

Machine Type: Mechanical Sewing Machine
Stitches: 23 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: Up to 5mm
Buttonholes: 4-step
Presser Feet: Snap-on system
Bobbin: Top-loading Class 15 transparent
Needle System: 130/705 H
Power Supply: 110V, 60Hz (US/Canada)
Dimensions: 15.4" x 7.1" x 12.2"
Weight: 12.3 lbs