Singer Samba 6 Sewing Machine Manual

The Singer Samba 6 is a versatile mechanical sewing machine featuring 6 built-in stitches, easy stitch selection dial, adjustable stitch length and width, built-in buttonhole function, free arm capability, automatic bobbin winding, built-in needle threader, drop feed for darning and free-motion sewing, and adjustable presser foot pressure. Powered by 110-120V AC, this compact machine is ideal for beginners and basic sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Stitch selection dial, stitch length control, stitch width control, reverse stitch button, free arm, built-in light, foot pedal, and accessory storage.

Machine Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

1. Remove machine from packaging: Remove all protective materials and tape.
2. Install foot pedal: Connect to machine port and place on floor.
3. Connect power: Plug power cord into machine and wall outlet (110-120V AC).
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Place bobbin on winder, thread through tension disc, press pedal to wind.
6. Insert bobbin: Remove bobbin case, insert bobbin with thread unwinding counterclockwise.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

1. Thread machine: Follow numbered threading guide on machine.
2. Use needle threader: Lower threader lever, hook thread, pull back to thread needle.
3. Select straight stitch: Turn stitch dial to straight stitch position.
4. Practice sewing: Place fabric under presser foot, lower foot, gently press pedal.
5. Test reverse: Hold reverse lever to sew backwards for seam reinforcement.
6. Change stitches: Experiment with different stitch patterns and settings.

CAUTION! Always turn handwheel toward you. Never force the machine.

Specifications

• Stitches: 6 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm for zigzag
• Buttonhole: One-step automatic
• Needle System: 15x1 household needles
• Bobbin: Class 15 transparent
• Free Arm: Yes, with removable extension table
• Light: Built-in LED light
• Power: 110-120V AC, 60Hz
• Weight: Approximately 11 lbs (5 kg)
• Dimensions: 15.2" x 6.7" x 12.2"

Controls and Settings

Main controls located on front and side of machine.

Stitch Selection Dial: Turn to select from 6 built-in stitches. Stitch Length Control: Adjust for shorter/longer stitches (0-4mm). Stitch Width Control: Adjust zigzag width (0-5mm). Reverse Stitch Lever: Hold down to sew backwards. Handwheel: Manual control of needle position. Presser Foot Lever: Raises and lowers presser foot. Bobbin Winder: Automatic bobbin winding system.

Stitch Selection

Six built-in stitches for various sewing applications.

1. Straight Stitch: Basic sewing, topstitching, basting
2. Zigzag Stitch: Seam finishing, appliqué, stretch fabrics
3. Blind Hem Stitch: Nearly invisible hems
4. Elastic Stitch: Sewing elastic, decorative stitching
5. Shell Stitch: Decorative edge finishing
6. Buttonhole Stitch: Automatic one-step buttonholes

Tip: Always test stitch on fabric scrap before starting project.

Basic Sewing Techniques

Fundamental sewing operations for common projects.

1. Seam Sewing: Use straight stitch with appropriate length for fabric.
2. Zigzag Finishing: Prevent fabric fraying with zigzag along raw edges.
3. Buttonholes: Mark position, select buttonhole stitch, machine makes complete buttonhole.
4. Darning: Drop feed dogs for free-motion mending.
5. Gathering: Use longer straight stitch and pull bobbin thread.
6. Free Arm Sewing: Remove extension table for sleeves and cuffs.

WARNING! Keep fingers away from moving needle. Use seam guide for straight stitching.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
3. Monthly: Clean tension discs with folded fabric strip.
4. Needle: Replace after 8-10 hours of sewing or if damaged.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Singer Samba 6.

Safety Information

Important safety precautions for sewing machine use.

• Always unplug machine when changing needles, cleaning, or not in use
• Keep fingers away from moving needle and presser foot
• Do not sew over pins - remove before needle reaches them
• Use proper lighting to see sewing area clearly
• Keep hair and loose clothing away from moving parts
• Do not use damaged power cords or plugs
• Supervise children when machine is in use
• Store in dry area away from moisture

Troubleshooting

Service: For technical support, contact Singer customer service at 1-800-4-SINGER or visit www.singer.com