Singer Pixie Craft Sewing Machine Manual

The Singer Pixie Craft is a compact, portable sewing machine designed for crafters and beginners. It features a simple threading system, built-in stitches, adjustable stitch length, free arm capability, built-in light, foot pedal control, and easy bobbin winding. Powered by 120V AC, this lightweight machine is perfect for small sewing projects, repairs, and craft applications. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact sewing head, foot pedal, power cord, accessory storage, built-in stitch patterns, free arm, bobbin winder, stitch length dial.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Carefully lift machine from box.
2. Attach foot pedal: Connect foot pedal to machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install accessories: Place accessory box in storage compartment.
5. Install needle: Insert needle with flat side to the back, tighten screw.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Plug in machine; follow setup steps for initial use.

1. Wind bobbin: Place empty bobbin on winder, thread through guide, press pedal to wind.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Thread upper thread: Follow numbered guides from spool to needle.
4. Select stitch: Turn stitch selector to desired pattern.
5. Adjust stitch length: Set dial to recommended setting for fabric.
6. Test sew: Use scrap fabric to test machine operation.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

• Machine Type: Compact portable sewing machine
• Stitches: Built-in straight, zigzag, and decorative patterns
• Stitch Length: Adjustable 0-4mm
• Speed Control: Foot pedal variable speed
• Lighting: Built-in LED work light
• Free Arm: Yes, for tubular sewing
• Bobbin: Class 15 transparent bobbin
• Needle: Standard domestic sewing machine needles
• Power Source: 120V AC, 60Hz
• Weight: Lightweight for portability

Controls and Functions

Front Panel: Stitch selector, stitch length dial, reverse lever, tension dial.

Basic Controls: Power switch, foot pedal connector, bobbin winder, hand wheel.

Stitch Selection: Turn dial to select straight, zigzag, or decorative stitches. Stitch Length: Adjust from 0 (basting) to 4 (long stitches). Reverse: Hold lever for backstitching. Tension: Adjust for different thread and fabric types. Bobbin Winder: Push bobbin to right to engage winding.

Threading the Machine

Follow numbered threading guides from spool to needle.

1. Place spool on pin: Ensure spool rotates counterclockwise.
2. Follow thread guides: Pass thread through all numbered guides.
3. Thread tension discs: Pass between tension discs.
4. Thread take-up lever: Pass through take-up lever from right to left.
5. Thread needle: Pass through eye from front to back.
6. Pull up bobbin thread: Hold upper thread, turn hand wheel to bring up bobbin thread.

Tip: Always raise presser foot when threading to open tension discs.

Stitch Selection and Settings

Supports straight stitch, zigzag, and decorative patterns.

1. Straight stitch: Use for seams, topstitching, basting.
2. Zigzag stitch: Use for finishing edges, appliqué, stretch fabrics.
3. Decorative stitches: Select pattern for decorative sewing.
4. Adjust length: Short for fine fabrics, long for basting.
5. Adjust width: For zigzag and decorative stitches.
6. Reverse stitching: Use at beginning and end of seams.
7. Free arm: Remove accessory tray for sewing sleeves and cuffs.

WARNING! Always test stitch on scrap fabric first. Use appropriate needle for fabric type.

Maintenance and Cleaning

Unplug before maintenance. Clean lint regularly from bobbin area and feed dogs.

1. Remove needle plate: Use screwdriver to access bobbin area.
2. Clean lint: Use small brush to remove lint and threads.
3. Oil machine: Apply sewing machine oil to moving parts as directed.
4. Replace needle: Change needle after every project or if damaged.
5. Store properly: Cover machine when not in use.

CAUTION! Use only sewing machine oil. Do not use household oils.

Safety Information

Always unplug when not in use. Keep fingers away from needle. Do not operate with damaged cord. Use proper lighting. Keep work area clean and organized.

Regulatory Information

UL Listed: Complies with safety standards. Copyright © Singer Manufacturing Company. For support, visit www.singer.com or contact 1-800-4-SINGER. Made for household use only.

Troubleshooting

Reset: Unplug for 5 minutes if electronic issues occur.

Service: 1-800-4-SINGER; www.singer.com