Singer Esteem Sewing Machine 1732 Manual

The Singer Esteem Sewing Machine 1732 is a versatile mechanical sewing machine featuring 32 built-in stitches, 4-step buttonhole, adjustable stitch length and width, built-in needle threader, top drop-in bobbin system, free arm capability, and multiple presser feet. Powered by 110-120V AC, this machine is ideal for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories Included 10. Troubleshooting

Features at a Glance

Key components: 32 built-in stitches, free arm, built-in needle threader, top drop-in bobbin, stitch length/width controls, reverse stitch button, presser foot pressure adjustment.

Feature	Description
Built-in Stitches	32 stitches including utility, decorative, and stretch
4-step Buttonhole	Automatic buttonhole with 4 easy steps
Built-in Needle Threader	Easy needle threading system
Top Drop-in Bobbin	Easy bobbin loading with clear cover
Free Arm	Removable extension table for sewing cuffs and sleeves
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable from 0-5mm
Reverse Stitch	Button for reinforcing stitches
Presser Foot Pressure	Adjustable for different fabric types
Power Switch	On/off power control with light

Unpacking and Setup

Carefully unpack all components and place on stable surface.

Remove machine from packaging: Lift machine by base, not handwheel.
Attach extension table: Slide into position until it clicks.
Install foot control: Plug into machine front port.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine is heavy; lift with care. Keep fingers away from needle during operation.

First-Time Operation

Power on machine; follow setup steps for initial use.

Wind bobbin: Place thread on spool pin, guide thread through bobbin winder tension.
Insert bobbin: Drop bobbin into case with thread counterclockwise.
Thread upper thread: Follow numbered threading path on machine.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always turn off power when changing needles or cleaning.

Specifications

Model: Singer Esteem 1732
Stitches: 32 built-in stitches
Buttonhole: 4-step automatic
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Bobbin: Top drop-in, Class 15 transparent
Needle System: HAx1 standard
Max Sewing Speed: 750 stitches per minute
Power Supply: 110-120V AC, 60Hz
Machine Weight: 12.5 lbs (5.7 kg)

Controls and Functions

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, handwheel, power switch/light.

Stitch Selection: Turn dial to select from 32 stitches (numbered 1-32). Stitch Length: 0-4mm (0 for darning, 4 for basting). Stitch Width: 0-5mm (0 for straight stitch, 5 for widest zigzag). Reverse: Hold button to sew in reverse for reinforcement. Handwheel: Turn toward you to manually move needle up/down.

Stitch Selection Guide

Stitch chart includes: Straight stitch (1), zigzag (2-4), stretch stitches (5-8), decorative stitches (9-32).

Straight Stitch (1): General sewing, topstitching
Zigzag Stitch (2-4): Finishing edges, appliqué
Stretch Stitches (5-8): Knits and stretch fabrics
Decorative Stitches (9-32): Embellishments and decorative work
Buttonhole (B): 4-step process for perfect buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Upper threading and bobbin winding procedures.

Raise presser foot and needle to highest position.
Place spool on spool pin, guide thread through threading path.
Use built-in needle threader: Push lever down and hook thread through needle.
Wind bobbin: Place empty bobbin on winder, engage winder, press foot control.
Insert bobbin: Drop into case, pull thread through slot and under tension spring.

WARNING! Ensure needle is fully raised when threading to prevent damage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint: Remove needle plate and bobbin case, brush away lint.
Oil machine: Apply sewing machine oil to hook race and moving parts (monthly).
Change needle: Replace needle after 8-10 hours of sewing or if damaged.
Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories Included

Accessory	Quantity	Use
All-Purpose Foot	1	General sewing
Zipper Foot	1	Zippers and piping
Buttonhole Foot	1	Buttonholes
Button Sewing Foot	1	Sewing on buttons
Bobbin (Class 15)	4	Extra bobbins
Needles (HAx1)	3	Replacement needles
Seam Ripper/Lint Brush	1	Fixing stitches and cleaning
Edge/Quilting Guide	1	Even seam allowances

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread bunching	Incorrect threading/tension	Re-thread machine; check bobbin; adjust tension
Skipped stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle type
Machine not running	Power/pedal connection	Check power cord; ensure pedal plugged in
Needle breaks	Wrong needle/bent needle	Replace needle; check for proper installation
Uneven stitches	Tension issues	Adjust upper tension; re-thread bobbin
Fabric not feeding	Presser foot pressure	Adjust presser foot pressure; clean feed dogs

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com