Singer Esteem II Sewing Machine Manual

The Singer Esteem II is a versatile electronic sewing machine featuring built-in stitches, automatic needle threader, adjustable stitch length and width, drop-in bobbin system, free arm capability, and multiple presser feet. Suitable for beginners and experienced sewers alike, this machine offers easy operation with professional results. Below are key sections covering features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, built-in stitches, automatic needle threader, drop-in bobbin system, free arm, LED work light, and multiple presser feet.

Feature	Description
Built-in stitches	23 utility and decorative stitches
Automatic needle threader	Easy threading with push-pull mechanism
Drop-in bobbin	Top-loading with clear cover for visibility
Free arm	Removable extension table for cylindrical sewing
Stitch length/width	Adjustable for customization
Presser feet	Includes all-purpose, zipper, buttonhole, and more
LED work light	Bright illumination of sewing area
Reverse stitch	Button for reinforcing stitches
Power switch	On/off control with speed slider
Foot control	Included for hands-free speed adjustment

Unpacking and Setup

Remove machine from packaging and inspect all components.

Place machine on stable surface: Ensure flat, sturdy table or sewing cabinet.
Install foot control: Plug into machine's foot control port.
Connect power: Plug power cord into machine and wall outlet.
Attach accessories: Install presser foot, thread spool pin, and extension table.
Thread machine: Follow threading diagram for upper and lower threading.

WARNING! Keep fingers away from needle area during operation. Always turn off when not in use.

Basic Operation

Power on machine; select desired stitch and settings.

Select stitch: Turn stitch selection dial to desired pattern.
Adjust settings: Set stitch length and width as needed.
Thread needle: Use automatic needle threader or manual threading.
Insert bobbin: Place bobbin in drop-in compartment following arrow direction.
Begin sewing: Place fabric under presser foot, lower foot, and press foot control.

CAUTION! Always use correct needle for fabric type. Replace bent or dull needles immediately.

Specifications

Stitches: 23 built-in (straight, zigzag, decorative)
Stitch Length: Adjustable up to 4mm
Stitch Width: Adjustable up to 5mm
Bobbin: Class 15 transparent
Needle: Standard domestic 130/705 H system
Max Sewing Speed: 750 stitches per minute
Power Supply: 110V, 60Hz (US/Canada)
Machine Dimensions: 15.2" x 6.7" x 12.2"
Weight: 12.3 lbs
Warranty: 25-year limited warranty

Controls and Settings

Control Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Additional Controls: Power switch, foot control pedal, presser foot lever, hand wheel.

Stitch Length: 0-4mm adjustment for stitch density. Stitch Width: 0-5mm for zigzag and decorative stitches. Reverse: Hold button for backstitching. Tension: Adjust upper thread tension dial (4-6 for normal fabrics).

Stitch Selection

23 built-in stitches including:

Straight stitch: Basic sewing (length 2.5mm recommended)
Zigzag stitch: Finishing edges and stretch fabrics
Blind hem: Nearly invisible hems
Buttonhole: 4-step automatic buttonholes
Decorative: Scallop, multiple zigzag patterns
Elastic: For knit and stretch fabrics

Tip: Test stitches on scrap fabric before sewing project.

Threading and Bobbin

Upper Threading:

Raise presser foot and needle to highest position
Place spool on pin and secure with cap
Follow threading path marked on machine
Use automatic needle threader or thread manually

Bobbin Winding and Insertion:

Place empty bobbin on winder spindle
Thread through bobbin winding tension disk
Press foot control to wind bobbin
Insert bobbin in drop-in compartment with thread clockwise

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning ensures optimal performance.

Remove lint: Use brush to clean bobbin area and feed dogs
Oil machine: Apply sewing machine oil to designated points (see diagram)
Clean exterior: Wipe with soft, dry cloth
Needle replacement: Change needle after 8-10 hours of sewing

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories:

All-purpose foot
Zipper foot
Buttonhole foot
Button sewing foot
Seam ripper/lint brush
Needles (assorted sizes)
Bobbins (4 class 15)
Screwdriver
Spool pin felt
Power cord and foot control

Safety Information

Important safety precautions for sewing machine operation:

Always disconnect power when changing needles, cleaning, or not in use
Keep fingers away from moving parts and needle
Do not sew over pins - remove before stitching
Use proper ventilation when cleaning or oiling
Store foot control safely to prevent damage
Keep machine away from children and pets

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure switch is on; test outlet
Thread breaking	Tension/thread quality	Rethread machine; adjust tension; use quality thread
Uneven stitches	Threading/tension	Rethread upper and lower; clean bobbin area; adjust tension
Needle breaks	Wrong needle/bent needle	Replace needle; ensure correct size for fabric; don't pull fabric
Fabric not feeding	Presser foot pressure	Clean feed dogs; check presser foot is lowered; adjust pressure
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure correct insertion direction

Service: For technical support, contact Singer at 1-800-4-SINGER or visit www.singer.com