singer electronic control sewing machine manual

The Singer Electronic Control Sewing Machine is a modern sewing system featuring electronic stitch selection, automatic needle threading, built-in stitch patterns, adjustable stitch length and width, automatic tension control, drop-in bobbin system, LED lighting, speed control slider, and various presser feet for different sewing applications. Powered by 120V AC, this machine is designed for both beginners and experienced sewers with its user-friendly electronic controls and versatile functionality. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, automatic needle threader, built-in LED light, drop-in bobbin system, free arm capability, multiple presser feet, and speed control slider.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into grounded electrical outlet.
3. Install foot controller: Connect to machine port, place on floor.
4. Attach standard presser foot: Lower presser foot lever to snap into place.
5. Wind and insert bobbin: Follow threading diagram for proper installation.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged when not in use.

First-Time Operation

Power on machine; familiarize yourself with basic controls.

1. Thread the machine: Follow numbered threading path on machine.
2. Use automatic needle threader: Push lever down and hook thread through needle.
3. Select basic straight stitch: Use stitch selection dial or buttons.
4. Practice on scrap fabric: Test stitch quality and tension settings.
5. Adjust stitch length: Start with medium setting (2.5-3.0) for general sewing.

CAUTION! Always turn off power when changing needles, presser feet, or performing maintenance.

Specifications

• Machine Type: Electronic Sewing Machine
• Stitch Patterns: 20+ built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonhole Styles: 1-step automatic
• Needle Positions: Multiple positions available
• Bobbin System: Drop-in, front loading
• Lighting: LED work light
• Power Requirements: 120V AC, 60Hz
• Speed Control: Electronic speed slider
• Warranty: 25-year limited warranty

Controls and Settings

Electronic control panel with stitch selection buttons, LCD display, and function controls.

Main Controls: Power switch, stitch selection buttons, stitch length/width adjustment, reverse stitch button, automatic needle threader, thread cutter.

Stitch Settings: Straight stitch, zigzag stitch, stretch stitches, decorative stitches, buttonhole stitch. Tension Control: Automatic electronic tension with manual override available. Speed Settings: Controlled by foot pedal or speed slider. Display: LCD shows selected stitch pattern and settings.

Stitch Selection & Patterns

Access built-in stitches through electronic control panel.

1. Basic Stitches: Straight stitch (left, center, right needle positions), zigzag stitch.
2. Decorative Stitches: Multiple pattern stitches for embellishment.
3. Stretch Stitches: For knit fabrics and elastic materials.
4. Buttonhole: 1-step automatic buttonhole with sensor technology.
5. Blind Hem: Special stitch for nearly invisible hems.
6. Overcast: For finishing fabric edges to prevent fraying.

Tip: Always test stitch on scrap fabric before sewing your project.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

1. Raise presser foot and needle to highest position.
2. Follow numbered threading path from spool pin to needle.
3. Use automatic needle threader: Push lever down, hook thread, release lever.
4. Wind bobbin: Place thread on spool pin, wind following machine guide.
5. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
6. Pull up bobbin thread: Hold needle thread, turn hand wheel toward you.

WARNING! Ensure machine is powered off when threading bobbin area.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs with unthreaded machine.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories Included

Standard accessories provided with your Singer Electronic Control Sewing Machine.

Safety Information

Important safety precautions for operating your sewing machine.

• Always disconnect power when changing needles, presser feet, or cleaning.
• Keep fingers away from moving parts and needle area.
• Do not sew over pins - remove them before they reach the presser foot.
• Use proper needle size and type for your fabric.
• Ensure adequate lighting in your work area.
• Keep machine clean and free of lint buildup.
• Store machine in dry area away from moisture.
• Use only Singer recommended accessories and supplies.

Troubleshooting

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com