Singer Capri 141 Sewing Machine Manual

The Singer Capri 141 is a versatile and user-friendly sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, free arm capability, and easy bobbin winding system. This manual covers safety guidelines, machine features, setup instructions, operation, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading the Machine 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Built-in stitch patterns, free arm, built-in needle threader, drop-in bobbin system, stitch length/width controls, reverse stitch button, power and speed control.

Feature	Description
Built-in Stitch Patterns	Multiple pre-programmed stitches including straight, zigzag, and decorative
Free Arm	Removable accessory compartment for sewing sleeves and cuffs
Built-in Needle Threader	Easy needle threading with automatic assistance
Drop-in Bobbin System	Top-loading bobbin for easy insertion and monitoring
Stitch Length Control	Adjustable stitch length from 0-4mm
Stitch Width Control	Adjustable stitch width up to 5mm
Reverse Stitch Button	Reinforce stitches at beginning and end of seams
Power/Speed Control	Foot pedal with variable speed control
Thread Tension Dial	Adjustable upper thread tension
Presser Foot Pressure	Adjustable for different fabric types

Installation & Setup

Unpack and inspect all components. Place machine on stable, flat surface.

Remove packaging materials and protective covers from machine.
Attach power cord to machine and plug into grounded electrical outlet.
Install foot pedal and position for comfortable access.
Attach standard presser foot following threading diagram.
Wind and insert bobbin into bobbin case.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow threading and bobbin installation procedures.

Thread upper thread following numbered path on machine.
Use built-in needle threader for easy needle threading.
Insert wound bobbin into drop-in bobbin system.
Select straight stitch pattern for initial testing.
Place fabric under presser foot and lower foot lever.
Press foot pedal gently to begin sewing.

CAUTION! Always use correct needle size for fabric type. Test stitches on scrap fabric first.

Specifications

Machine Type: Electronic Sewing Machine
Stitch Patterns: 14 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonholes: 1-step automatic
Needle Positions: Left, center, right
Bobbin: Class 15 transparent
Free Arm: Yes, with removable accessory compartment
Power Supply: 110V, 60Hz
Weight: 11 lbs (5 kg)
Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine. Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, thread tension dial.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for narrow or wide zigzag stitches. Reverse Stitch: Hold button to sew in reverse. Thread Tension: Adjust for balanced stitches (4 is normal setting).

Stitch Selection

Available stitch patterns include:

Straight Stitch - Basic sewing and topstitching
Zigzag Stitch - Overcasting and decorative work
Blind Hem Stitch - Nearly invisible hems
Stretch Stitch - For knit fabrics
Decorative Stitches - Various patterns for embellishment
Buttonhole Stitch - Automatic 1-step buttonholes

Tip: Refer to stitch guide on machine for recommended settings for each stitch type.

Threading the Machine

Proper threading is essential for good stitch quality.

Raise presser foot and raise needle to highest position.
Place spool on spool pin and secure with cap.
Follow numbered threading path from spool to needle.
Use built-in needle threader: Push lever down and hook thread through needle eye.
For bobbin: Wind bobbin using bobbin winding system, then drop into bobbin case.
Pull bobbin thread up through needle plate.

WARNING! Always thread with presser foot raised and power off.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Unplug machine before cleaning or maintenance.
Remove needle plate and clean lint from bobbin area.
Oil moving parts as indicated in lubrication points diagram.
Wipe exterior with soft, dry cloth.
Replace needle regularly (after 8-10 hours of sewing).

CAUTION! Use only sewing machine oil. Never use household oils.

Accessories

Standard accessories included with Singer Capri 141:

All-purpose foot
Zipper foot
Buttonhole foot
Seam ripper/lint brush
Set of needles
Class 15 bobbins (3)
Screwdriver
Spool pin felt
Power cord and foot control
Hard cover

Safety Information

FCC Compliance: Class B digital device. Electrical Safety: UL listed components. Always disconnect power when not in use. Keep machine away from water and moisture. Do not operate with damaged cord or plug. Keep hands away from moving parts during operation. Store in dry location when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread machine; adjust tension; check for burrs on needle
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type
Bobbin thread bunching	Incorrect bobbin insertion	Remove and reinsert bobbin; ensure thread follows correct path
Machine not running	Power connection/foot pedal	Check power cord; ensure foot pedal is connected properly
Uneven stitches	Tension issues	Adjust upper and bobbin tension; re-thread completely
Needle breaking	Wrong needle/bent needle	Replace needle; ensure needle is inserted correctly and tight

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com