Singer Athena 2000 Electronic Sewing Machine Manual

The Singer Athena 2000 is an advanced electronic sewing machine featuring computerized stitch selection, automatic needle threading, built-in stitch patterns, adjustable stitch length and width, drop-in bobbin system, LED display, speed control, and multiple presser feet. Powered by standard household electrical outlet with voltage compatibility for your region. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Functions 6. Stitch Selection and Settings 7. Basic Sewing Operations 8. Advanced Features 9. Maintenance & Cleaning 10. Warranty Information 11. Troubleshooting Guide

Features at a Glance

Key components: Electronic control panel, automatic needle threader, drop-in bobbin system, multiple presser feet, LED display, built-in stitch patterns, speed control slider.

FeatureDescription
Electronic Control PanelDigital display for stitch selection and settings
Automatic Needle ThreaderEasy threading with push-button mechanism
Drop-in Bobbin SystemTop-loading bobbin with clear cover
Built-in Stitch PatternsOver 50 utility, decorative, and stretch stitches
LED DisplayShows selected stitch number and settings
Speed Control SliderAdjustable sewing speed from slow to fast
Buttonhole StitchOne-step automatic buttonhole
Presser FeetIncludes zipper, buttonhole, and general purpose feet
Needle PositionAutomatic needle up/down function
Power SwitchMain power control with indicator light

Unpacking and Setup

Carefully unpack all components and place on stable sewing table.

  1. Remove machine from packaging: Lift machine by base, not by handwheel.
  2. Attach accessories: Install foot controller, power cord, and accessory box.
  3. Position machine: Place on flat, stable surface at comfortable height.
  4. Connect power: Plug into appropriate electrical outlet.
  5. Install needle: Follow threading diagram for proper needle installation.

WARNING! Machine is heavy; lift with proper support. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow initial setup procedure.

  1. Thread machine: Follow numbered threading path from spool to needle.
  2. Wind bobbin: Use built-in bobbin winder with thread guide.
  3. Insert bobbin: Place in bobbin case with thread pulling counterclockwise.
  4. Select stitch: Choose basic straight stitch for initial testing.
  5. Test sew: Use scrap fabric to check tension and stitch quality.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Technical Specifications

Controls and Functions

Access functions via control panel buttons and dials. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse button, needle up/down button.

Control Panel: Stitch selection dial, stitch length adjustment, stitch width adjustment, reverse stitch button, automatic needle threader, thread cutter, speed control slider.

Stitch Selection: Turn dial to select from built-in stitch patterns. Stitch Adjustment: Use length and width controls to customize stitches. Special Functions: Reverse stitching for reinforcement, automatic needle positioning, built-in thread cutter.

Stitch Selection and Settings

Select from utility stitches (straight, zigzag, stretch), decorative stitches, and buttonholes.

  1. Turn stitch selection dial to desired pattern number.
  2. Adjust stitch length: 0-4mm for different fabric types.
  3. Adjust stitch width: 0-5mm for zigzag and decorative stitches.
  4. Test on scrap fabric before sewing project.

Tip: Refer to stitch guide chart for recommended settings for different fabrics.

Basic Sewing Operations

Follow proper threading and operation procedures for optimal results.

  1. Thread machine: Follow numbered path from spool pin to needle.
  2. Wind bobbin: Use bobbin winder with thread tension disc.
  3. Insert bobbin: Drop into bobbin case with thread in correct direction.
  4. Raise presser foot: Lift lever to insert fabric under needle.
  5. Start sewing: Press foot controller gently to begin.
  6. Guide fabric: Let machine feed fabric; do not pull or push.
  7. Reverse stitching: Press reverse button to secure seam ends.
  8. Cut threads: Use built-in thread cutter or scissors.

WARNING! Always turn power off when changing needles or cleaning. Keep hands away from moving parts.

Advanced Features

Automatic Needle Threader: Push lever to thread needle automatically. Buttonhole Maker: One-step automatic buttonhole with sensor. Decorative Stitches: Built-in patterns for embellishment. Memory Function: Stores frequently used stitch settings.

Maintenance & Cleaning

Unplug machine before maintenance. Clean bobbin area regularly with brush provided. Oil moving parts as recommended in manual.

CAUTION! Use only Singer recommended oil. Do not use compressed air for cleaning.

Warranty Information

Singer 25-year limited warranty covers mechanical and electronic components. Warranty registration card included. For service, contact authorized Singer service centers. Keep original receipt for warranty claims. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting Guide

SymptomPossible CauseCorrective Action
Machine won't startPower connection/foot controlCheck power cord connection; ensure foot control is plugged in properly.
Thread breakingTension/thread qualityCheck threading path; adjust tension; use quality thread.
Uneven stitchesNeedle/tension issuesReplace needle; rethread machine; check bobbin threading.
Fabric not feedingPresser foot/feed dogsEnsure presser foot is down; clean feed dogs; check pressure setting.
Needle threader not workingPosition/obstructionEnsure needle is in highest position; check for thread obstruction.

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-4-SINGER; www.singer.com

Singer Athena 2000 Electronic Sewing Machine Manual © - All Rights Reserved 2025