Singer 9020 Sewing Machine Manual

The Singer 9020 is a versatile computerized sewing machine featuring 90 built-in stitches, automatic needle threader, top drop-in bobbin system, adjustable stitch length and width, automatic tension control, built-in needle plate thread guide, free arm capability, and LED lighting. Powered by standard household electrical outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized stitch panel, automatic needle threader, drop-in bobbin system, free arm, LED work light, foot pedal control.

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers.
2. Position machine on flat, stable surface at comfortable height.
3. Connect foot pedal to machine and plug into power outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Place thread on spool pin, guide through tension discs, wind bobbin evenly.
6. Insert bobbin: Place bobbin in case with thread counterclockwise, pull thread through slot.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread upper thread: Use automatic needle threader or manual threading path.
2. Pull up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
3. Select basic straight stitch: Turn stitch selection dial to position 1.
4. Place fabric under presser foot, lower foot lever.
5. Begin sewing: Press foot pedal gently to start, guide fabric evenly.
6. Use reverse stitch: Hold reverse button to reinforce beginning and end of seams.

CAUTION! Always use correct needle for fabric type. Replace bent or damaged needles immediately.

Specifications

• Stitch Patterns: 90 built-in stitches
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Buttonholes: 6 one-step automatic buttonholes
• Needle Positions: Multiple needle positions available
• Bobbin: Class 15 transparent top drop-in bobbin
• Presser Feet: 6 included presser feet
• Lighting: LED work light
• Power Requirements: 110-120V, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse stitch button.

Control Panel: Stitch pattern display, automatic needle threader button, thread cutter, speed control slider.

Stitch Selection: Turn dial to choose from 90 stitch patterns. Stitch Length: Adjust from 0-4mm for different fabric types. Stitch Width: Adjust from 0-5mm for decorative stitches. Tension: Automatic with manual override available. Speed Control: Slider for slow to fast sewing speeds.

Stitch Selection

Choose from 90 built-in stitches for various sewing applications.

1. Basic Stitches: Straight stitch (1-5), zigzag (6-10), stretch stitches (11-20)
2. Decorative Stitches: Scallops, waves, leaves, flowers (21-60)
3. Buttonholes: 6 one-step automatic buttonholes (61-66)
4. Blind Hem: Specialized hemming stitches (67-70)
5. Overcast: Stitches for finishing edges (71-75)
6. Quilting: Special quilting stitches (76-80)
7. Embroidery: Decorative embroidery patterns (81-90)

Tip: Always test stitch on fabric scrap before beginning project.

Basic Sewing Techniques

Master fundamental sewing skills with proper techniques.

1. Straight Seams: Guide fabric evenly, maintain consistent seam allowance
2. Curved Seams: Sew slowly, pivot fabric at curves
3. Corners: Stop with needle down, lift presser foot, pivot fabric
4. Gathering: Use longer stitch length, pull bobbin threads to gather
5. Zippers: Use zipper foot for invisible and standard zipper installation
6. Buttonholes: Mark position, use automatic one-step buttonhole function
7. Hems: Use blind hem foot for invisible hemming
8. Darts: Stitch from wide end to point, tie threads securely

WARNING! Always disconnect power when changing presser feet or needles.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs
2. Weekly: Oil bobbin case and hook race (use sewing machine oil only)
3. Monthly: Clean tension discs with soft brush
4. Needles: Replace after 8 hours of sewing or when damaged
5. Light Bulb: Replace LED light when dim (unplug machine first)

CAUTION! Use only Singer recommended sewing machine oil. Never use household oils.

Accessories

Included accessories for various sewing applications.

Safety Information

Important safety precautions for safe sewing machine operation.

• Always disconnect power when not in use
• Keep fingers away from moving needle
• Use proper needle for fabric type
• Replace bent or damaged needles immediately
• Do not pull fabric while sewing - let feed dogs move fabric
• Keep work area well-lit and organized
• Store machine covered when not in use
• Keep machine away from water and moisture

EMERGENCY: In case of electrical issues, immediately unplug machine.

Troubleshooting

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com