Singer 2263 Sewing Machine Manual

The Singer 2263 is a versatile mechanical sewing machine featuring 23 built-in stitches, 4-step buttonhole, automatic needle threader, adjustable stitch length and width, free arm capability, built-in LED light, top drop-in bobbin system, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with 23 built-in stitches, automatic needle threader, free arm, LED work light, accessory storage.

Feature	Description
Built-in Stitches	23 stitches including straight, zigzag, decorative, and stretch
4-Step Buttonhole	Easy buttonhole creation with precise sizing
Automatic Needle Threader	Quick and easy needle threading
Free Arm	Removable extension table for sewing cuffs and sleeves
Top Drop-in Bobbin	Easy bobbin loading with clear cover
LED Work Light	Bright illumination of sewing area
Stitch Length Control	Adjustable from 0-4mm
Stitch Width Control	Adjustable up to 5mm
Reverse Sewing	Built-in reverse stitch function
Presser Feet	Includes all-purpose, zipper, buttonhole, and button sewing feet

Unpacking and Setup

Unpack and inspect all contents. Place on stable surface at comfortable working height.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet.
Install foot controller: Connect to machine port.
Attach accessory tray: Snap into position on free arm.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Machine is heavy; lift with care. Keep fingers away from needle area during setup.

First-Time Operation

Power on machine; follow setup procedures.

Thread machine: Follow threading guide printed on machine.
Wind bobbin: Place empty bobbin on winder, thread through tension disc.
Insert bobbin: Drop bobbin into case with thread moving counterclockwise.
Select stitch: Turn stitch selector dial to desired pattern.
Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Stitches: 23 built-in stitches
Buttonhole: 4-step manual buttonhole
Stitch Length: Adjustable 0-4mm
Stitch Width: Adjustable up to 5mm
Needle System: HAx1 standard needles
Bobbin: Class 15 transparent bobbin
Max Sewing Speed: 750 stitches per minute
Presser Feet: 4 included feet
Lighting: Built-in LED light
Power Source: 120V AC, 60Hz
Machine Weight: 12.3 lbs (5.6 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selector dial, stitch length dial, stitch width dial, reverse button.

Operation: Power switch, foot controller port, bobbin winder, hand wheel, presser foot lever, thread cutter.

Stitch Selection: Turn dial to select from 23 stitches. Stitch Length: Adjust for fabric thickness (0-4mm). Stitch Width: Adjust for zigzag and decorative stitches (0-5mm). Reverse: Hold button for reinforcement stitching. Tension: Adjust upper thread tension dial (2-6 recommended).

Stitch Selection

23 built-in stitches for various sewing applications.

Straight Stitch: Basic sewing (position 1)
Zigzag Stitch: Overcasting and appliqué (position 2)
Blind Hem: Nearly invisible hemming (position 3)
Stretch Stitches: For knit fabrics (positions 4-6)
Decorative Stitches: Embellishment stitches (positions 7-23)
Buttonhole: 4-step process (special setting)

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise needle: Turn hand wheel to highest position.
Place spool: Put thread on spool pin.
Thread machine: Follow numbered guide on machine.
Use needle threader: Push lever down and through needle eye.
Wind bobbin: Place on winder, thread through guide, press foot controller.
Insert bobbin: Drop into case, pull thread through slot.
Bring up bobbin thread: Hold upper thread, turn hand wheel once.

WARNING! Ensure machine is off when threading to prevent accidental starts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning.
Remove needle plate: Use screwdriver to access bobbin area.
Clean lint: Use brush to remove lint from feed dogs and bobbin case.
Oil machine: Apply sewing machine oil to moving parts as directed.
Replace needle: Change needle after every project or if damaged.
Store properly: Cover machine when not in use.

CAUTION! Use only sewing machine oil. Never spray cleaners directly on machine.

Regulatory Information

UL Listed: Certified for safety standards. Copyright © 2025 Singer Manufacturing Company. All rights reserved. For technical support and service, visit www.singer.com or contact 1-800-4-SINGER. Made for household use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot controller is plugged in; check power switch.
Thread breaking	Tension/thread quality	Rethread machine; adjust tension; use quality thread; check for burrs on needle.
Skipped stitches	Needle issues	Replace needle; ensure correct needle type; check threading.
Bobbin thread bunching	Bobbin threading	Rethread bobbin; ensure bobbin inserted correctly; clean bobbin case.
Uneven feeding	Presser foot pressure	Clean feed dogs; check presser foot is properly attached; adjust pressure if available.
Noise during operation	Lint/lack of oil	Clean and oil machine; check for loose parts; remove threaded bobbin case for cleaning.

Service: 1-800-4-SINGER; www.singer.com