Singer 2000 Sewing Machine Manual

The Singer 2000 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for darning and quilting, LED display, speed control, and reverse stitching. Powered by standard household outlet with foot pedal control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, built-in LED light, free arm, automatic needle threader, drop feed mechanism, accessory compartment.

Installation & Setup

Unpack and inspect contents. Place on stable surface at comfortable height.

1. Remove packaging materials and protective covers.
2. Place machine on sturdy table or sewing cabinet.
3. Connect foot pedal to machine and plug into power outlet.
4. Install needle according to markings (flat side toward back).
5. Wind bobbin and thread machine following threading diagram.

WARNING! Keep fingers away from needle area during operation. Always turn off when not in use.

First-Time Operation

Power on machine; follow basic setup procedure.

1. Turn power switch to ON position.
2. Select straight stitch pattern (position 1).
3. Place fabric under presser foot and lower foot lever.
4. Gently press foot pedal to begin sewing.
5. Practice on scrap fabric to adjust tension and stitch settings.

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

• Machine Type: Electronic sewing machine
• Stitch Patterns: 20 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonholes: 1-step automatic
• Needle Positions: Left, center, right
• Max Sewing Speed: 800 stitches per minute
• Power Requirements: 120V AC, 60Hz
• Weight: 12.5 lbs (5.7 kg)
• Warranty: 25-year limited

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length control, stitch width control, reverse button.

Additional Controls: Presser foot lever, hand wheel, bobbin winder, thread tension dial, free arm release.

Stitch Selection: Turn dial to choose from straight, zigzag, stretch, decorative stitches. Tension: Adjust for different fabric types (lower for lightweight, higher for heavy). Speed: Control with foot pedal pressure or speed limiter.

Stitch Selection

Supports multiple stitch types for various sewing applications.

1. Straight Stitch: Basic sewing (positions 1-3)
2. Zigzag Stitch: Overcasting and appliqué (positions 4-6)
3. Blind Hem: Nearly invisible hems (position 7)
4. Elastic Stretch: For knit fabrics (positions 8-10)
5. Decorative Stitches: Ornamental patterns (positions 11-20)
6. Buttonhole: Automatic 1-step (position B)

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance & Cleaning

Unplug machine before cleaning. Remove lint and dust regularly.

1. Remove needle plate and clean feed dog area with brush.
2. Clean bobbin case and surrounding area.
3. Oil moving parts as indicated in manual (use sewing machine oil only).
4. Wipe exterior with soft, dry cloth.

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories: Assorted presser feet, bobbins, needles, seam ripper, brush, screwdriver, spool caps.

Regulatory Information

UL Listed: Certified for household use. FCC Part 15: Class B digital device compliance. Copyright © 2006 Singer Manufacturing Company. All rights reserved. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Turn power off and on to reset electronic functions.

Service: 1-800-4-SINGER; www.singer.com