Singer 160th Anniversary Sewing Machine Manual

The Singer 160th Anniversary Sewing Machine is a commemorative model celebrating Singer's legacy in the sewing industry. This advanced computerized sewing machine features 160 built-in stitches, automatic needle threader, LCD display, adjustable stitch length and width, built-in needle plate, drop feed for free-motion sewing, automatic tension control, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in stitch patterns, accessory compartment, foot pedal, power supply.

Unpacking and Setup

Unpack and inspect all contents. Place on stable sewing table.

1. Remove machine from packaging: Lift machine by base, not handle.
2. Install foot pedal: Connect to machine port, place on floor.
3. Connect power supply: Plug into machine and wall outlet.
4. Install needle: Loosen needle clamp, insert needle flat side back.
5. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care using both hands. Ensure stable surface before operation.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread machine: Follow threading path indicated by numbers.
2. Use automatic needle threader: Push lever down to thread needle.
3. Insert bobbin: Place bobbin in case with thread counterclockwise.
4. Select basic stitch: Turn dial to straight stitch position.
5. Test sew: Use scrap fabric to test stitch quality.
6. Adjust tension: Use tension dial if stitches are uneven.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading or changing needle.

Specifications

• Stitch Patterns: 160 built-in stitches including utility, decorative, and stretch
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable 0-7mm
• Maximum Sewing Speed: 850 stitches per minute
• Needle Positions: Left, center, right
• Presser Feet: 6 included (zigzag, zipper, buttonhole, etc.)
• Bobbin: Front loading, class 15 transparent
• Display: Backlit LCD with stitch preview
• Power Source: 120V AC, 60Hz
• Machine Weight: 15.4 lbs (7 kg)

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, LCD display, stitch width/length buttons.

Control Panel: Power button, stitch selection, reverse stitch, needle up/down, speed control, automatic thread cutter.

Stitch Settings: Length (0-4mm), width (0-7mm), mirror image, memory function. Utility: Automatic needle threader, bobbin winding, drop feed, presser foot pressure adjustment. Display: Shows selected stitch, settings, error messages, needle position.

Stitch Selection and Settings

Choose from 160 built-in stitches including basic, stretch, decorative, and buttonhole stitches.

1. Turn stitch selection dial to desired stitch number.
2. Adjust stitch length using length control button.
3. Adjust stitch width using width control button.
4. For buttonholes: Select buttonhole stitch, use automatic 4-step process.
5. For decorative stitches: Use mirror function for symmetrical designs.
6. Save settings: Use memory function to save favorite stitch combinations.

Tip: Always test stitches on scrap fabric before sewing your project.

Advanced Sewing Techniques

Supports various sewing techniques for different projects.

1. Free-motion sewing: Drop feed dogs, use darning foot.
2. Quilting: Use walking foot for even fabric feeding.
3. Zipper installation: Use zipper foot for precise placement.
4. Button sewing: Use automatic buttonhole function.
5. Monogramming: Use alphabet stitches with stabilizer.
6. Gathering: Use gathering foot for even gathers.
7. Blind hem: Use blind hem foot and stitch.
8. Overcasting: Use overcast foot to finish raw edges.

WARNING! Always use appropriate presser foot for each technique. Never force fabric through machine.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

1. Daily: Clean lint from bobbin area and feed dogs.
2. Weekly: Oil machine according to lubrication points diagram.
3. Monthly: Check needle plate for burrs, replace if damaged.
4. As needed: Replace needle after 8 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only Singer recommended oil.

Accessories Included

Standard accessories provided with your Singer 160th Anniversary machine.

• All-purpose foot
• Zipper foot
• Buttonhole foot
• Blind hem foot
• Overcasting foot
• Button sewing foot
• Seam ripper/lint brush
• Set of needles (various sizes)
• Extra bobbins (class 15)
• Screwdriver
• Spool pin felt
• Power cord and foot control

Regulatory Information

UL Listed: Complies with UL safety standards for household sewing machines. Copyright © 2024 Singer; trademarks of Singer Licensing Company. For warranty information, refer to included warranty card. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Turn machine off and on to reset computerized functions.

Service: 1-800-4-SINGER; www.singer.com