Singer 1507 Sewing Machine Instruction Manual

The Singer 1507 is a versatile mechanical sewing machine featuring 10 built-in stitches, 4-step buttonhole, adjustable stitch length and width, automatic bobbin winding, drop-in bobbin system, built-in free arm, and easy stitch selection dial. Powered by 120V AC, this machine is ideal for basic sewing projects, repairs, and creative crafts. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, stitch selection dial, bobbin winder, free arm, and accessory storage.

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot controller: Plug into machine's foot control port.
3. Connect power: Plug power cord into machine and wall outlet (120V AC).
4. Install needle: Loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
5. Attach presser foot: Lift presser foot lever, snap foot into place.

WARNING! Keep fingers away from needle area during operation. Always turn off and unplug when not in use.

First-Time Operation

Power on machine; follow threading diagram.

1. Wind bobbin: Place thread on spool pin, guide thread through bobbin winder tension, press bobbin winder button.
2. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
3. Thread upper thread: Follow numbered threading path from spool to needle.
4. Select stitch: Turn stitch selection dial to desired stitch pattern.
5. Test sew: Place fabric under presser foot, lower foot, and gently press foot controller.

CAUTION! Always start with scrap fabric to test stitches and tension.

Specifications

• Model: Singer 1507
• Stitches: 10 built-in stitches
• Buttonhole: 4-step manual buttonhole
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm for zigzag stitches
• Bobbin: Class 15 transparent bobbin
• Needle: Standard domestic sewing machine needle
• Power Supply: 120V AC, 60Hz
• Machine Weight: Approximately 13.2 lbs (6 kg)
• Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever, bobbin winder.

Stitch Selection: Turn dial to select from 10 built-in stitches including straight stitch, zigzag, blind hem, and stretch stitches.

Stitch Length: Adjust from 0 (for darning) to 4mm (basting). Normal sewing: 2.5mm.

Stitch Width: Adjust zigzag width from 0-5mm. Straight stitch: set to 0.

Tension Control: Upper thread tension dial (0-9). Normal setting: 4-5.

Stitch Selection

10 built-in stitches for various sewing applications.

1. Straight Stitch (Position 1): Basic sewing, topstitching, basting
2. Zigzag Stitch (Position 2): Seam finishing, appliqué, decorative work
3. Multiple Zigzag (Position 3): Stretch fabrics, elastic application
4. Blind Hem (Position 4): Nearly invisible hemming
5. Stretch Stitches (Positions 5-7): For knit and stretch fabrics
6. Decorative Stitches (Positions 8-10): Creative sewing projects

Buttonhole: Use positions A-B-C-D on stitch dial for 4-step buttonhole creation.

Threading & Bobbin

Proper threading ensures smooth operation.

1. Upper Threading: Follow numbered path: spool pin → thread guide → tension discs → take-up lever → needle.
2. Bobbin Winding: Place spool on pin, thread through guide, wrap around bobbin 2-3 times, press winder button.
3. Bobbin Insertion: Drop bobbin into case with thread pulling counterclockwise, pull thread through slot.
4. Needle Threading: Raise needle to highest position, thread from front to back.
5. Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you until bobbin thread appears.

Tip: Always use same thread type in bobbin and needle for balanced tension.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily Cleaning: Remove lint from bobbin area and feed dogs with brush.
2. Oil: Apply 1-2 drops of sewing machine oil to hook race monthly (consult manual for oiling points).
3. Needle Replacement: Replace needle after 8-10 hours of sewing or if damaged.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Singer 1507.

Safety Information

Important safety precautions for sewing machine operation.

• Always unplug machine when changing needles, cleaning, or not in use
• Keep fingers away from moving needle and presser foot
• Do not pull fabric while sewing - let feed dogs move fabric
• Use proper needle type and size for fabric being sewn
• Ensure work area is well-lit and free of obstructions
• Keep machine away from water and moisture
• Supervise children and beginners during operation

Troubleshooting

Service: 1-800-4-SINGER; www.singer.com