Singer 132q Sewing Machine Manual

The Singer 132q is a heavy-duty industrial sewing machine designed for professional use, featuring high-speed stitching capabilities, automatic lubrication system, reverse stitching function, adjustable presser foot pressure, and built-in thread cutter. Ideal for heavy fabrics like denim, canvas, and leather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heavy-duty metal frame, Automatic lubrication system, Reverse stitch lever, Thread tension dial, Stitch length regulator, Built-in thread cutter.

Feature	Description
Motor Type	Industrial clutch motor with speed control
Stitching Speed	Up to 1500 stitches per minute
Needle System	DBx1 industrial needles
Lubrication	Automatic oil circulation system
Presser Foot	Adjustable pressure for different fabrics
Reverse Stitching	Lever-operated for securing stitches
Thread Tension	Dial-controlled upper thread tension
Stitch Length	Adjustable from 0-5mm
Thread Cutter	Built-in knife for quick thread trimming
Bobbin System	Rotating hook with class 15 bobbins

Installation

Unpack and inspect contents. Place on stable work surface.

Position machine: Ensure stable mounting on industrial table.
Install motor: Connect clutch motor to machine head and power source.
Connect foot pedal: Plug into motor controller for speed control.
Oil system: Fill oil reservoir with Singer recommended oil.
Power connection: Connect to appropriate voltage (check local requirements).

WARNING! Machine is heavy; use proper lifting equipment. Ensure all connections are secure before operation.

First-Time Setup

Prepare machine for initial use following these steps.

Thread machine: Follow threading diagram for upper and lower threads.
Install needle: Insert DBx1 needle with flat side facing back.
Wind bobbin: Use built-in bobbin winder with thread tension engaged.
Test stitching: Use scrap fabric to adjust tension and stitch length.
Lubrication check: Ensure oil is circulating properly through sight glass.

CAUTION! Always disconnect power when changing needles or performing maintenance.

Specifications

Machine Type: Industrial straight stitch
Stitch Length: 0-5mm adjustable
Maximum Speed: 1500 SPM
Presser Foot Lift: 10mm manual, 16mm knee lift
Needle System: DBx1 130/705H
Bobbin Type: Class 15 metal
Thread: Tex 40 to Tex 100
Motor: Clutch motor 550W
Weight: 35 kg
Dimensions: 450mm x 210mm x 380mm

Controls and Settings

Main controls located on machine head and motor assembly.

Machine Head: Handwheel, Reverse stitch lever, Stitch length regulator, Thread tension dial, Presser foot lever, Bobbin winder.

Stitch Adjustment: Length regulator (0-5mm), Thread tension dial (0-9), Presser foot pressure adjustment. Motor Controls: Foot pedal speed control, Power switch, Manual speed adjustment knob.

Connecting Accessories

Compatible with various industrial sewing attachments.

Turn off power before installing accessories.
Presser feet: Snap-on system for quick changes.
Guides: Edge guides and seam guides attach to needle plate.
Special attachments: Zipper foot, binder, folder attachments available.

Tip: Ensure machine is properly threaded after changing accessories.

Basic Sewing Operations

Standard sewing procedures for optimal results.

Starting: Position fabric under presser foot, lower foot, begin stitching.
Reverse stitching: Use reverse lever at beginning and end of seams.
Stitch length: Adjust according to fabric thickness and application.
Thread tension: Balance upper and lower thread for proper stitch formation.
Thread cutting: Use built-in thread cutter after completing seam.
Fabric handling: Guide fabric smoothly without pushing or pulling.

WARNING! Keep fingers away from needle area during operation. Use handwheel for precise needle positioning.

Maintenance Features

Automatic lubrication system requires regular maintenance. Daily oil checks, weekly cleaning of feed dogs and hook area, monthly full lubrication service.

Care & Cleaning

Disconnect power before cleaning. Remove lint and dust daily. Wipe exterior with dry cloth. Use recommended oil for lubrication only.

CAUTION! Do not use compressed air for cleaning as it forces debris into mechanisms. Never use water or chemical cleaners.

Regulatory Information

CE certified for industrial use. Complies with international safety standards for industrial machinery. Copyright © Singer Manufacturing Company. For technical support, visit www.singer.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect tension/damaged needle	Check thread tension; replace needle; ensure proper threading.
Skip stitches	Wrong needle/bent needle	Replace with correct DBx1 needle; check needle installation.
Machine jams	Thread buildup/poor maintenance	Clean hook area; check for proper oil circulation.
Uneven stitches	Incorrect tension/fabric feeding	Balance upper and lower tension; check presser foot pressure.
Motor not running	Power connection/foot pedal	Check power supply; inspect foot pedal connection; reset motor.

Service Interval: Professional service recommended every 6 months for heavy use.

Technical Support: Authorized Singer service centers; www.singer.com