Signature 2000 Sewing Machine Manual

The Signature 2000 is a versatile electronic sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonholer, free arm capability, drop feed for quilting, variable speed control, LED lighting, and easy bobbin winding system. Designed for both beginners and experienced sewers, it offers precision stitching for various fabrics and projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic stitch selection panel, automatic needle threader, free arm, drop feed mechanism, LED work light, built-in buttonholer, and variable speed control.

Unpacking and Setup

Carefully unpack all components and place on stable surface.

1. Remove machine from packaging: Lift machine by base, not handwheel.
2. Attach extension table: Slide into position until it clicks.
3. Install foot control: Plug into machine's foot control port.
4. Connect power: Plug power cord into machine and wall outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
6. Wind bobbin: Follow bobbin winding instructions in section.

WARNING! Machine is heavy; lift with care using both hands. Ensure stable work surface.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread machine: Follow threading path indicated on machine.
2. Use automatic needle threader: Lower lever to thread needle automatically.
3. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
4. Select basic stitch: Choose straight stitch for initial testing.
5. Test on scrap fabric: Practice stitching on fabric scrap before project.
6. Adjust tension: Start with default setting (4), adjust as needed.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Technical Specifications

• Stitch Patterns: 50 built-in stitches
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable 0-5mm
• Speed: Up to 800 stitches per minute
• Needle Positions: Left, center, right
• Presser Feet: 6 included (zigzag, zipper, buttonhole, button, blind hem, overedge)
• Bobbin: Class 15 transparent
• Power Requirements: 110V, 60Hz
• Dimensions: 15.4" x 7.1" x 11.8"
• Weight: 12.3 lbs

Controls and Functions

Access functions via control panel and manual dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Control Panel: Stitch pattern indicators, LED display, function buttons, needle up/down button.

Stitch Selection: Rotate dial to choose from 50 stitches. Stitch Length: Adjust from 0-4mm for different fabrics. Stitch Width: Adjust from 0-5mm for decorative stitches. Reverse: Hold button for reinforcement stitching. Needle Position: Manual adjustment or automatic with needle position button.

Stitch Selection Guide

Choose appropriate stitches for different fabrics and projects.

1. Straight Stitch: Basic sewing, seams (length 2.0-2.5mm)
2. Zigzag Stitch: Finishing edges, stretch fabrics (width 2.0-3.0mm)
3. Buttonhole: Automatic one-step buttonholes
4. Decorative Stitches: Satin, scallop, honeycomb for embellishment
5. Stretch Stitches: For knit fabrics to prevent popped seams
6. Blind Hem: Nearly invisible hemming

Tip: Test stitch on fabric scrap first to ensure proper tension and appearance.

Advanced Features

Free-motion quilting: Drop feed dogs and use darning foot. Automatic needle threader: Lower lever when needle is in highest position. Button sewing: Use button foot and select zigzag stitch. Zipper installation: Use zipper foot for precise placement. Monogramming: Select alphabet stitches and practice on stabilizer.

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning prevents lint buildup.

1. Remove needle plate: Use screwdriver to access bobbin area.
2. Clean lint: Use small brush to remove lint from feed dogs and bobbin case.
3. Oil machine: Apply 1-2 drops of sewing machine oil to designated points every 3 months.
4. Needle replacement: Change needle after every 8 hours of sewing or for new project.
5. Cover when not in use: Protect from dust and sunlight.

CAUTION! Use only sewing machine oil. Never use household oils.

Accessories

Included accessories: 6 presser feet, assorted needles, bobbins, seam ripper, lint brush, screwdriver, spool caps, instruction DVD.

Warranty Information

Limited 25-year warranty on mechanical parts, 2-year warranty on electrical components. Warranty covers defects in materials and workmanship. Does not cover damage from misuse, improper maintenance, or commercial use. For warranty service, contact authorized service center with proof of purchase. Keep original packaging for 90 days.

Troubleshooting

Service: Contact authorized service center at 1-800-555-SEWING; www.signaturesewing.com