Shark Euro Pro 384 Sewing Machine Manual

The Shark Euro Pro 384 is a versatile sewing machine featuring 384 built-in stitches, automatic needle threader, LCD display, adjustable sewing speed, built-in memory for stitch patterns, automatic buttonhole function, free arm capability, drop feed for free-motion sewing, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, bobbin winder, free arm, accessory compartment, foot pedal, power connector.

Feature	Description
LCD Display	Shows selected stitch number and settings
Automatic Needle Threader	Easy threading with push-button mechanism
384 Built-in Stitches	Includes utility, decorative, and stretch stitches
Automatic Buttonhole	One-step buttonhole function
Free Arm	For sewing cuffs and tubular items
Drop Feed	For free-motion quilting and darning
Stitch Memory	Stores frequently used stitch combinations
Variable Speed Control	Adjustable sewing speed from 0-850 SPM
LED Work Light	Illuminates sewing area
Accessory Storage	Built-in compartment for presser feet and tools

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove machine from packaging and all protective materials
Attach power cord to machine and plug into AC outlet
Install foot pedal and position for comfortable use
Wind bobbin and thread machine following threading guide
Insert needle properly with flat side to the back

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup procedures.

Thread machine: Follow numbered threading path on machine
Wind bobbin: Place thread on spool pin, guide through tension, wind bobbin
Insert bobbin: Drop-in bobbin system with clear cover
Select basic stitch: Turn dial to straight stitch (position 1)
Test sew: Use scrap fabric to test stitch quality and tension
Adjust tension: Use tension dial if stitches are too loose or tight

CAUTION! Always start with needle in highest position. Keep work area clean and well-lit.

Specifications

Stitches: 384 built-in stitches including utility, decorative, quilting, and stretch
Sewing Speed: 0-850 stitches per minute
Needle Positions: Left, center, right with adjustable needle stop position
Presser Feet: Includes zigzag foot, buttonhole foot, zipper foot, blind hem foot, button sewing foot
Bobbin: Top drop-in bobbin with clear cover
Threading: Automatic needle threader
Display: LCD with stitch number and settings
Power Source: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and stitch selection dial. Front Panel: Power switch, stitch selection dial, reverse stitch button, stitch width/length adjustment, automatic needle threader.

Basic Controls: Power switch, stitch selection dial, reverse button, stitch width dial, stitch length dial, thread cutter.

Stitch Settings: Stitch length (0-4mm), stitch width (0-7mm), needle position (left/center/right). Special Functions: Mirror image, stitch memory, automatic thread cutter, start/stop button (sewing without foot pedal).

Stitch Selection

Use stitch selection dial to choose from 384 built-in stitches.

Turn machine power on
Rotate stitch selection dial to desired stitch number
View stitch number and recommended settings on LCD display
Adjust stitch width and length as needed for fabric type
Test stitch on scrap fabric before sewing project
Use reverse stitch button to secure beginning and end of seams

Tip: Refer to stitch guide chart for recommended uses of each stitch type.

Advanced Functions

Automatic Buttonhole: One-step automatic buttonhole function.

Attach buttonhole foot
Select buttonhole stitch (position 35)
Place button in foot measurement gauge
Lower presser foot and start sewing
Machine automatically sews perfect buttonhole

Stitch Memory: Store up to 10 stitch combinations for quick access.

Free Motion Sewing: Drop feed dogs for quilting and embroidery.

WARNING! Always use correct presser foot for each function. Keep fingers clear of moving parts.

Maintenance & Cleaning

Unplug machine before cleaning and maintenance.

Clean lint from bobbin area after each project
Oil machine as directed in maintenance schedule
Wipe exterior with soft, dry cloth
Replace needle regularly (after 8-10 hours of sewing)
Check belt tension periodically

CAUTION! Use only sewing machine oil. Do not spray cleaners directly on machine.

Accessories

Included accessories: Zigzag foot, buttonhole foot, zipper foot, blind hem foot, button sewing foot, seam ripper, cleaning brush, needles, bobbins, spool caps, screwdriver.

Optional Accessories: Walking foot, quilting guide, extension table, additional specialty presser feet.

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Copyright © 2025 Shark Euro Pro; trademarks of Euro Pro Corporation. For support, visit www.sharkeuropro.com or contact 1-800-555-3847.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection/foot pedal	Check power cord; ensure foot pedal is plugged in; check power switch.
Thread breaking	Tension/thread quality	Reduce tension; use better quality thread; check for burrs on needle.
Skipped stitches	Needle/thread mismatch	Replace needle; ensure correct needle for fabric; rethread machine.
Bobbin thread bunching	Threading/bobbin insertion	Rethread top and bobbin; ensure bobbin inserted correctly.
Uneven stitches	Tension settings	Adjust upper and bobbin tension; clean race area.
Needle breaks	Bent needle/wrong size	Replace needle; use correct needle size; don't pull fabric.
Machine jams	Thread buildup	Turn off power; remove fabric; clean bobbin area; rethread.

Reset: Turn power off and on to reset electronic functions.

Service: 1-800-555-3847; www.sharkeuropro.com