Riccar Sewing Machine User Manual

The Riccar Sewing Machine is a professional-grade sewing machine designed for both beginners and experienced sewers, featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in LED lighting, free arm capability, drop feed for free-motion sewing, and various presser feet for different applications. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and seam ripper.

Installation

Unpack and inspect contents. Place on stable surface at comfortable height.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Attach foot pedal: Connect to machine port, place on floor.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Install bobbin: Follow bobbin loading instructions.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Setup

Prepare machine for first use with proper threading and bobbin installation.

1. Thread upper path: Follow numbered threading guide on machine.
2. Use automatic needle threader: Push lever down and hook thread through needle.
3. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
4. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
5. Test stitches: Use scrap fabric to test basic straight stitch.

CAUTION! Always raise needle to highest position before threading.

Specifications

• Stitch Patterns: 23 built-in stitches including straight, zigzag, decorative.
• Stitch Length: Adjustable 0-4mm.
• Stitch Width: Adjustable 0-5mm for zigzag stitches.
• Maximum Sewing Speed: 800 stitches per minute.
• Needle System: HAx1 standard domestic needles.
• Bobbin: Class 15 transparent bobbin.
• Presser Feet: Included: All-purpose, zipper, buttonhole, blind hem.
• Power Requirements: 120V AC, 60Hz.
• Weight: 12.5 lbs (5.7 kg).
• Warranty: 25-year limited warranty.

Controls and Settings

Main controls located on front and top of machine body.

Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

Top Features: Spool pins, thread guides, tension dial, bobbin winder, hand wheel.

Stitch Settings: Straight stitch (position 1), zigzag (position 2-5), stretch stitches (6-10), decorative (11-23). Tension: Adjust for different fabrics (3-4 for medium weight). Feed Dogs: Lower for free-motion work.

Threading and Bobbin

Proper threading ensures smooth operation and quality stitches.

1. Raise presser foot and needle to highest position.
2. Place spool on spool pin, thread through guides following numbered path.
3. Use automatic needle threader: Push lever down, hook thread, release lever.
4. Wind bobbin: Place empty bobbin on winder, thread through pre-tension, push to engage.
5. Insert bobbin: Open cover, drop in bobbin with thread pulling counterclockwise.
6. Pull bobbin thread up: Hold upper thread, turn hand wheel to catch bobbin thread.

Tip: Always test tension on scrap fabric before starting project.

Stitch Selection

Choose appropriate stitches for different sewing applications.

1. Straight Stitch: Basic sewing, position 1, length 2.5mm.
2. Zigzag Stitch: Finishing edges, appliqué, width 3-5mm.
3. Buttonhole: 4-step automatic buttonhole with special foot.
4. Blind Hem: Nearly invisible hemming with blind hem foot.
5. Stretch Stitches: For knit fabrics to prevent popped seams.
6. Decorative Stitches: Embellishment and decorative sewing.
7. Reverse Stitch: Secure beginnings and ends of seams.

WARNING! Always use correct presser foot for selected stitch.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Remove lint from bobbin area and feed dogs after each project.
2. Oiling: Apply sewing machine oil to hook race and moving parts monthly.
3. Needle Replacement: Change needle after 8-10 hours of sewing or for new project.
4. Storage: Cover machine when not in use, store in dry area.
5. Professional Service: Annual servicing recommended for heavy use.

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Riccar sewing machine.

Regulatory Information

UL Listed: Certified for safety standards. FCC Compliance: Meets electromagnetic interference requirements. Copyright © 2025 Riccar; trademarks of Riccar America. For technical support, visit www.riccar.com or contact 1-800-555-1234. Made with precision engineering for reliable performance.

Troubleshooting

Reset: Turn off machine, unplug for 30 seconds, then restart.

Service: 1-800-555-1234; www.riccar.com