Riccar 1570 Sewing Machine Manual

The Riccar 1570 is a high-performance sewing machine designed for both beginners and experienced sewers. This versatile machine features multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in LED lighting, free arm capability, and a durable metal frame construction. Below are key sections covering setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Maintenance and Cleaning 8. Accessories Included 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Metal frame construction, LED work light, automatic needle threader, free arm, stitch selection dial, tension control, presser foot pressure adjustment.

FeatureDescription
Stitch Patterns30 built-in stitches including straight, zigzag, and decorative
Automatic Needle ThreaderEasy one-step needle threading system
Free ArmConvertible for sewing cuffs and sleeves
LED LightingBright illumination of work area
Stitch Length ControlAdjustable from 0-4mm
Stitch Width ControlAdjustable from 0-5mm
Buttonhole StitchOne-step automatic buttonhole
Drop FeedFor free-motion sewing and quilting
Reverse StitchBuilt-in reverse sewing function
Power Requirements120V AC, 60Hz

Unpacking and Setup

Carefully unpack all components and place on stable surface.

  1. Remove machine from packaging: Lift machine by base, not by carrying handle.
  2. Attach power cord: Plug into machine and wall outlet.
  3. Install foot pedal: Connect to machine port.
  4. Thread machine: Follow threading diagram on machine.
  5. Insert bobbin: Wind bobbin and place in bobbin case.

WARNING! Machine is heavy; use proper lifting technique. Ensure stable work surface.

Basic Operation

Power on machine; LED light will illuminate.

  1. Select stitch: Turn stitch selection dial to desired pattern.
  2. Adjust settings: Set stitch length and width as needed.
  3. Thread needle: Use automatic needle threader or thread manually.
  4. Place fabric: Lower presser foot onto fabric.
  5. Begin sewing: Press foot pedal gently to start.
  6. Reverse stitching: Hold reverse button to reinforce stitches.

CAUTION! Keep fingers away from moving needle. Always turn off when not in use.

Specifications

Controls and Settings

Main control panel located on front of machine. Stitch Selection Dial: Rotate to choose stitch pattern. Stitch Length Dial: Adjust from 0-4mm. Stitch Width Dial: Adjust from 0-5mm. Reverse Stitch Button: Hold for reverse sewing. Power Switch: On/Off control.

Additional Features: Automatic needle threader, thread cutter, drop feed lever, presser foot pressure dial, free arm conversion.

Stitch Settings: Straight stitch (position 1), zigzag stitch (position 2-5), decorative stitches (positions 6-30). Buttonhole: One-step automatic (position 31).

Stitch Selection Guide

Comprehensive guide to all 30 built-in stitches.

  1. Straight Stitch: Basic sewing, position 1
  2. Zigzag Stitch: Overcasting, positions 2-5
  3. Blind Hem: Position 6
  4. Stretch Stitches: Positions 7-9
  5. Decorative Stitches: Positions 10-25
  6. Quilting Stitches: Positions 26-28
  7. Buttonhole: One-step, position 31
  8. Satin Stitches: Positions 29-30

Tip: Test stitches on scrap fabric before starting project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush lint from bobbin area and feed dogs
  2. Weekly: Oil moving parts with sewing machine oil
  3. Monthly: Clean tension discs and thread path
  4. As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories Included

Standard accessories packaged with machine.

AccessoryQuantityPurpose
All-purpose foot1General sewing
Zipper foot1Zipper installation
Buttonhole foot1Automatic buttonholes
Blind hem foot1Invisible hemming
Overedge foot1Edge finishing
Darning/embroidery foot1Free-motion work
Extra needles5Replacement needles
Bobbins4Extra bobbins
Seam ripper/brush1Tool combination
Screwdriver1Needle plate removal

Safety Information

Important safety precautions for operation.

WARNING! Never leave machine plugged in and unattended.

Warranty Information

Riccar 1570 comes with limited warranty coverage.

Limited Warranty: 25-year limited warranty on mechanical parts, 5-year limited warranty on electrical components, 1-year labor warranty. Warranty valid only with proof of purchase from authorized dealer. Does not cover damage from misuse, improper maintenance, or unauthorized repairs.

For warranty service: Contact authorized Riccar service center. Keep original receipt for warranty claims.

Troubleshooting

SymptomPossible CauseCorrective Action
Needle breaksWrong needle/bent needleReplace with correct needle type; ensure straight insertion
Thread bunchingIncorrect threading/tensionRethread machine; adjust upper tension
Machine won't startPower/pedal issuesCheck power cord; ensure pedal plugged in; check power switch
Uneven stitchesTension issuesAdjust upper and bobbin tension; rethread completely
Fabric not feedingPresser foot/dog issuesCheck presser foot pressure; clean feed dogs; lower presser foot
Noisy operationLint/lack of oilClean lint from bobbin area; oil moving parts
Needle thread breaksNeedle/tension issuesReplace needle; reduce tension; check for burrs on needle plate
Bobbin thread breaksBobbin issuesRewind bobbin; check bobbin case for lint; adjust bobbin tension

Service: For persistent issues, contact authorized Riccar service center at 1-800-555-1234 or visit www.riccar.com

Riccar 1570 Sewing Machine Manual © - All Rights Reserved 2025