Pixie Plus Sewing Machine Manual

The Pixie Plus is a compact, user-friendly sewing machine designed for beginners and hobbyists. It features multiple stitch patterns, adjustable stitch length and width, built-in needle threader, top drop-in bobbin system, free arm capability, LED lighting, and easy tension control. Powered by 120V AC, this lightweight machine is perfect for basic sewing projects, repairs, and creative crafts. Below are key sections covering features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact sewing machine body, foot pedal, power adapter, accessory kit, instructional manual.

Unpacking and Setup

Carefully unpack all components and inspect for damage.

1. Remove machine from packaging: Lift from carrying case.
2. Attach power cord: Connect to machine and wall outlet.
3. Install foot pedal: Plug into machine port.
4. Position machine: Place on stable, flat surface.
5. Install needle: Loosen screw, insert needle flat side back, tighten.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Prepare machine for initial use with practice fabric.

1. Thread machine: Follow threading guide printed on machine.
2. Wind bobbin: Use built-in bobbin winder with thread spool.
3. Insert bobbin: Place in bobbin case following directional arrows.
4. Select stitch: Turn dial to desired stitch pattern.
5. Test sew: Use scrap fabric to practice stitching.

CAUTION! Always start with needle in highest position. Keep work area clean and organized.

Specifications

• Machine Type: Compact electronic sewing machine
• Stitches: 10 built-in patterns
• Stitch Length: 0-4mm adjustable
• Stitch Width: Up to 5mm for zigzag
• Bobbin System: Top drop-in, class 15 transparent
• Needle Position: Single position
• Lighting: LED work light
• Power Supply: 120V AC, 60Hz
• Weight: 11 lbs (5 kg)
• Included Accessories: Presser feet, needles, bobbins, seam ripper, brush

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, built-in threader lever.

Stitch Selection: Turn dial to choose from straight, zigzag, stretch, blind hem, and decorative stitches. Stitch Length: Adjust for shorter/longer stitches (0-4mm). Stitch Width: Control zigzag width (0-5mm). Tension: Dial adjustment for upper thread tension (1-9). Reverse: Hold button for backstitching at beginning/end of seams.

Stitch Selection

Choose appropriate stitch for your fabric and project.

1. Straight Stitch: Basic sewing, seams (position 1)
2. Zigzag Stitch: Finishing edges, stretch fabrics (position 2)
3. Blind Hem: Nearly invisible hemming (position 3)
4. Stretch Stitch: Elastic seams for knits (position 4)
5. Decorative Stitches: Ornamental patterns (positions 5-10)

Tip: Test stitch on fabric scrap first. Adjust tension as needed.

Threading and Bobbin

Proper threading ensures smooth operation.

1. Raise presser foot and needle to highest position.
2. Place thread spool on holder, follow numbered threading path.
3. Use built-in threader: Push lever down, hook thread, pull back.
4. Wind bobbin: Place thread on spool pin, wrap around bobbin, push winder.
5. Insert bobbin: Drop into case, pull thread through slot, under tension spring.
6. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you.

WARNING! Always use same thread type in needle and bobbin. Match thread to fabric weight.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush lint from bobbin area and feed dogs. Monthly: Oil moving parts with sewing machine oil (sparingly). Needle Replacement: Change every 8-10 hours of sewing or if damaged.

CAUTION! Unplug before cleaning or maintenance. Use only sewing machine oil.

Troubleshooting

Service: For technical support, contact customer service at 1-800-555-SEWN or visit www.pixieplussewing.com