New Home Sewing Machine SS 2015 Manual

The New Home SS 2015 is a versatile home sewing machine featuring automatic needle threading, built-in stitch patterns, adjustable stitch length and width, free arm capability, drop feed for darning and quilting, built-in buttonhole function, adjustable presser foot pressure, and variable speed control. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Operations 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Automatic needle threader, stitch pattern selector, free arm, drop feed mechanism, built-in buttonhole function, variable speed control.

Feature	Description
Automatic needle threader	Easy threading with push-button mechanism
Stitch pattern selector	Dial for selecting built-in stitch patterns
Free arm capability	Removable extension table for sewing sleeves and cuffs
Drop feed mechanism	Lowers feed dogs for darning and free-motion quilting
Built-in buttonhole	Automatic one-step buttonhole function
Variable speed control	Foot pedal controls sewing speed
Stitch length adjustment	Adjustable from 0-4mm
Stitch width adjustment	Adjustable from 0-5mm
Reverse stitch	Button for reinforcing stitches
Bobbin winding	Built-in bobbin winding system

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove machine from packaging: Lift carefully from carrying case.
Install foot pedal: Connect to machine port and plug into power outlet.
Thread machine: Follow threading diagram on machine body.
Wind bobbin: Use built-in bobbin winding system.
Insert bobbin: Place in bobbin case following directional arrows.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Plug in machine; follow setup procedure.

Thread machine: Use automatic needle threader for easy threading.
Select stitch: Turn pattern dial to desired stitch.
Adjust settings: Set stitch length and width as needed.
Test sew: Use scrap fabric to test stitch quality.
Practice basic operations: Straight stitch, zigzag, and reverse.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

Machine Type: Electronic home sewing machine
Stitch Patterns: 15 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonhole: One-step automatic
Needle System: HA-1 standard domestic needles
Bobbin: Class 15 transparent bobbin
Power Source: 120V AC, 60Hz
Speed: Up to 800 stitches per minute
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls: Stitch pattern dial, stitch length dial, stitch width dial, reverse stitch button, bobbin winder.

Stitch Selection: Turn pattern dial to select from 15 built-in stitches including straight, zigzag, stretch, and decorative stitches.

Adjustments: Stitch length (0-4mm), stitch width (0-5mm), thread tension (1-9), presser foot pressure. Special functions: Reverse stitch for reinforcement, drop feed for free-motion work, free arm for tubular items.

Stitch Selection

Built-in stitch patterns include:

Straight stitch (left, center, right needle positions)
Zigzag stitch (narrow to wide)
Blind hem stitch
Stretch stitches (for knit fabrics)
Decorative stitches (scallop, multiple zigzag)
Buttonhole stitch (one-step automatic)
Overcast stitch (for seam finishing)

Tip: Always test stitch on scrap fabric before sewing your project.

Basic Sewing Operations

Step-by-step sewing procedures:

Raise presser foot and position fabric under needle
Lower presser foot and hold thread tails
Press foot pedal gently to start sewing
Guide fabric gently without pulling
Use reverse stitch at beginning and end of seams
Raise needle to highest position before removing fabric
Use appropriate presser foot for each operation

WARNING! Never sew over pins. Keep fingers away from moving needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil machine according to lubrication points diagram
Monthly: Clean motor and electrical components with dry cloth
As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning. Use only recommended sewing machine oil.

Accessories

Included accessories:

Standard presser foot
Zipper foot
Buttonhole foot
Darning/embroidery foot
Seam ripper/lint brush
Additional bobbins (3)
Needles (assorted sizes)
Spool caps and felt

Note: Use only New Home brand accessories for optimal performance.

Regulatory Information

UL Listed: Certified for household use in North America. Copyright © 2015 New Home Sewing Machine Company. Complies with FCC Part 15 for electromagnetic compatibility. For technical support, visit www.newhome.com or contact 1-800-555-1234. Made in Japan.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Wrong needle/bent needle	Replace with correct needle type; ensure straight insertion
Thread bunching	Incorrect threading/tension	Re-thread completely; adjust upper tension
Skipped stitches	Dull needle/wrong needle	Replace needle; use correct needle for fabric type
Machine won't run	Power/foot pedal	Check power connection; ensure foot pedal is plugged in
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension discs
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure

Service: 1-800-555-1234; www.newhome.com