New Home Sewing Machine 632 Manual

The New Home Sewing Machine 632 is a versatile mechanical sewing machine featuring straight stitch, zigzag stitch, buttonhole function, free arm capability, built-in light, adjustable stitch length and width, reverse stitching, drop feed for darning and embroidery, and built-in thread cutter. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, free arm, stitch selection dial, tension control, bobbin case, built-in light, foot pedal control.

Feature	Description
Stitch selection dial	Selects straight, zigzag, and decorative stitches
Stitch length control	Adjusts stitch length from 0-4mm
Stitch width control	Adjusts zigzag width from 0-5mm
Reverse stitch lever	For reinforcing stitches at beginning/end
Free arm	Removable extension table for sewing sleeves and cuffs
Built-in light	Illuminates sewing area
Drop feed lever	Lowers feed dogs for darning and embroidery
Bobbin winder	Winds bobbin automatically while sewing
Tension control dial	Adjusts upper thread tension (0-9)
Presser foot pressure	Adjustable for different fabric types

Installation & Setup

Unpack and inspect contents. Place on stable table or sewing cabinet.

Remove machine from packaging: Lift carefully from carrying case.
Position machine: Place on flat, stable surface at comfortable height.
Install foot pedal: Connect to machine port, place on floor.
Plug into AC power: Use included power cord.
Attach accessories: Install standard presser foot, needle, and thread spool pin.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface placement.

First-Time Operation

Power on machine; follow setup procedures.

Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.
Wind bobbin: Place empty bobbin on winder, thread through tension disc, engage winder.
Thread machine: Follow numbered threading path on machine.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
Test stitches: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from needle area during operation.

Specifications

Type: Mechanical sewing machine
Stitches: Straight, zigzag, 4-step buttonhole
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Speed Control: Foot pedal operated
Needle System: HAx1 standard domestic needles
Bobbin: Class 15 transparent bobbin
Max Sewing Speed: 800 stitches per minute
Power Source: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse stitch lever.

Thread tension: Adjust dial (lower numbers for lighter tension, higher for heavier). Presser foot pressure: Adjust screw above needle bar. Feed dog position: Use drop feed lever. Built-in light: Always on when machine is powered.

Stitch Selection

Turn stitch selection dial to choose desired stitch pattern.

Straight stitch: Position 1, use for basic sewing
Zigzag stitch: Position 2-5, use for finishing edges and decorative work
Buttonhole: Position 6, 4-step process for creating buttonholes
Blind hem: Position 7, for nearly invisible hemming
Stretch stitches: Position 8-9, for knit fabrics

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading is essential for good stitch quality.

Upper threading: Follow numbered path from spool pin to needle
Raise presser foot: Ensures proper thread tension disc engagement
Bobbin winding: Use built-in bobbin winder with machine threaded
Bobbin insertion: Open bobbin cover, insert with thread pulling counterclockwise
Bring up bobbin thread: Hold upper thread, turn handwheel toward you

WARNING! Always turn handwheel toward you only.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts with sewing machine oil
Monthly: Clean tension discs with soft brush
As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with machine.

Accessory	Use
Standard presser foot	General sewing
Zipper foot	Installing zippers
Buttonhole foot	Creating buttonholes
Darning/embroidery foot	Free-motion work
Seam ripper	Removing stitches
Brush	Cleaning lint
Extra bobbins	Thread storage
Needles	Replacement needles
Screwdriver	Adjustments

Safety Information

Important safety precautions for machine operation.

Always disconnect power when changing needles or cleaning
Keep fingers away from moving needle
Do not pull fabric while sewing - let feed dogs move it
Use proper needle for fabric type
Ensure good lighting in sewing area
Keep machine clean and free of lint buildup
Store in dry area away from moisture

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Uneven stitches	Tension imbalance	Adjust upper and bobbin tension; rethread both.
Machine jams	Thread buildup in bobbin	Remove bobbin case and clean; check for proper threading.
No power	Power connection	Check power cord connection; ensure foot pedal is plugged in.
Needle breaks	Bent needle/fabric pull	Replace needle; don't pull fabric; check needle insertion.
Poor buttonholes	Stabilizer missing	Use stabilizer behind fabric; check buttonhole foot attachment.

Service: For technical support, contact authorized New Home service center.