New Home Memory Craft 7000 Sewing Machine Manual

The New Home Memory Craft 7000 is a computerized sewing machine with advanced features including built-in stitches, automatic needle threading, LCD display, memory function for stitch patterns, adjustable speed control, automatic buttonhole, built-in monogramming, and various presser feet for different sewing techniques. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in stitch patterns, memory function, speed control slider, bobbin winding system, drop feed dogs, and various presser feet.

Installation and Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove packaging materials and protective covers from machine.
2. Place machine on flat, stable surface at comfortable working height.
3. Connect foot control pedal to machine and plug into power outlet.
4. Install needle properly with flat side facing back.
5. Wind bobbin and insert into bobbin case following threading diagram.
6. Thread upper thread through automatic needle threader.

WARNING! Always unplug machine when not in use or when changing needles. Keep fingers away from moving parts.

First-Time Operation

Power on machine; follow initial setup procedure.

1. Plug in power cord and turn on power switch.
2. Select basic straight stitch using stitch selection buttons.
3. Adjust stitch length and width to desired settings.
4. Practice on scrap fabric to test tension and stitch quality.
5. Explore different stitch patterns using LCD display navigation.
6. Test automatic needle threader and thread cutter functions.

CAUTION! Always start with slow speed when learning new functions. Keep work area well-lit.

Specifications

• Machine Type: Computerized Sewing Machine
• Stitches: 100+ built-in stitches including utility, decorative, and stretch
• Stitch Width: Adjustable up to 7mm
• Stitch Length: Adjustable up to 5mm
• Speed: Up to 850 stitches per minute
• Needle Positions: Multiple with programmable up/down
• Display: LCD with stitch visualization
• Memory: Stores custom stitch combinations
• Automatic Features: Needle threader, thread cutter, buttonhole
• Power Requirements: 120V AC, 60Hz
• Weight: Approximately 25 lbs

Controls and Settings

Access functions via control panel buttons and LCD display. Main controls: Power switch, stitch selection, length/width adjustment, reverse stitch, needle up/down, automatic functions.

Control Panel: Stitch selection buttons, LCD navigation, memory buttons, speed control, automatic function buttons, settings menu.

Basic Settings: Stitch length (0-5mm), stitch width (0-7mm), tension adjustment (0-9), needle position, mirror image, twin needle mode. Advanced Settings: Memory storage, custom combinations, stitch elongation, pattern connection.

Stitch Selection and Memory

Select from built-in stitches or create custom combinations.

1. Use stitch category buttons to select stitch type (utility, decorative, etc.).
2. Navigate through stitches using arrow buttons or dial.
3. Adjust length and width for selected stitch.
4. Save custom combinations to memory using MEMORY button.
5. Recall saved patterns from memory banks.
6. Combine multiple stitches for complex patterns.

Tip: Practice new stitches on scrap fabric before using on projects.

Advanced Functions

Automatic Buttonhole: One-step process with sensor technology.

1. Select buttonhole stitch from built-in patterns.
2. Place button in automatic buttonhole foot.
3. Machine automatically measures and sews perfect buttonhole.
4. Monogramming: Select alphabet stitches and program letter sequences.
5. Memory Stitching: Create and store custom stitch sequences.
6. Mirror Imaging: Duplicate patterns in reverse for symmetrical designs.
7. Twin Needle: Use for decorative stitching and pintucks.

WARNING! Always use correct presser foot for each function. Remove pins before sewing over them.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

1. Clean lint from bobbin area and feed dogs after each project.
2. Oil moving parts as specified in maintenance schedule.
3. Replace needle regularly (every 8-10 hours of sewing).
4. Check and adjust tension as needed for different fabrics.
5. Store machine with cover when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories Included

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © New Home Sewing Machine Company. For technical support, contact authorized service centers or visit www.newhome.com.

Troubleshooting

Reset: Turn machine off and on to reset computerized functions.

Service: Contact authorized service center for repairs; 1-800-NEW-HOME; www.newhome.com