New Home Light Running Sewing Machine Manual

The New Home Light Running Sewing Machine is a versatile household sewing machine featuring lightweight design, easy operation, multiple stitch patterns, adjustable stitch length and width, built-in light, foot pedal control, bobbin winding system, reverse stitching capability, and various presser feet attachments. Powered by 110V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection & Patterns 7. Threading & Bobbin Winding 8. Maintenance & Cleaning 9. Accessories Included 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight aluminum body, built-in work light, stitch selection dial, tension control, bobbin winder, reverse stitch button, foot pedal control, accessory compartment.

FeatureDescription
Stitch Selection DialSelect from multiple built-in stitch patterns
Tension Control DialAdjust thread tension for different fabrics
Built-in Work LightIlluminates sewing area for better visibility
Reverse Stitch ButtonReinforces stitching at beginning and end
Foot Pedal ControlVariable speed control for precise sewing
Bobbin WinderAutomatic bobbin winding system
Stitch Length ControlAdjust stitch length from 0-4mm
Stitch Width ControlAdjust zigzag stitch width
Power SwitchTurns machine on/off
Accessory CompartmentStorage for presser feet and accessories

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

  1. Remove packaging materials and protective covers.
  2. Position machine on sturdy table or sewing cabinet.
  3. Connect foot pedal to machine and plug into power outlet.
  4. Install needle according to arrow direction.
  5. Thread upper thread and wind bobbin following threading guide.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

  1. Turn power switch to ON position; work light should illuminate.
  2. Select straight stitch pattern on stitch dial.
  3. Place scrap fabric under presser foot and lower foot.
  4. Gently press foot pedal to test stitching.
  5. Practice reverse stitching by holding reverse button.
  6. Adjust stitch length and tension as needed for fabric.

CAUTION! Always use proper needle for fabric type. Change needle regularly.

Specifications

Controls and Settings

Main controls located on front and top of machine.

Front Panel: Power switch, stitch selection dial, stitch length control, stitch width control, reverse stitch button.

Stitch Selection: Turn dial to select desired stitch pattern (straight, zigzag, stretch, decorative). Tension Control: Adjust for different fabric weights (lower numbers for lightweight fabrics, higher for heavy). Stitch Length: 0-4mm adjustment for stitch density. Stitch Width: 0-5mm for zigzag and decorative stitches. Reverse: Hold button while sewing to reinforce stitches.

Stitch Selection & Patterns

12 built-in stitch patterns for various sewing applications.

  1. Straight Stitch: Basic sewing, topstitching, basting
  2. Zigzag Stitch: Seam finishing, appliqué, stretch fabrics
  3. Blind Hem Stitch: Nearly invisible hems
  4. Stretch Stitch: For knit and stretch fabrics
  5. Decorative Stitches: 8 decorative patterns for embellishment
  6. Buttonhole: 4-step buttonhole function

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin Winding

Proper threading ensures smooth operation.

  1. Upper Threading: Follow numbered guide from spool pin to needle.
  2. Bobbin Winding: Place empty bobbin on winder, thread through tension disc, press pedal to wind.
  3. Bobbin Insertion: Drop bobbin into case with thread pulling counterclockwise.
  4. Thread Take-up: Bring bobbin thread up through needle plate.
  5. Needle Threading: Thread needle front to back, leave 4-6 inch tail.

WARNING! Always raise needle to highest position before threading.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
  3. Monthly: Clean tension discs with soft brush.
  4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories Included

Standard accessories provided with machine.

AccessoryPurpose
All-purpose FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootCreating buttonholes
Blind Hem FootHemming garments
Seam RipperRemoving stitches
BrushCleaning lint
Extra NeedlesVarious sizes
Bobbin (4)Extra bobbins
ScrewdriverNeedle plate removal

Regulatory Information

UL Listed: Complies with UL safety standards for household sewing machines. Copyright © 2025 New Home Sewing Company; all rights reserved. For technical support or warranty service, contact 1-800-NEW-HOME or visit www.newhomesewing.com. Made with pride in the USA.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRethread completely; adjust tension; check for burrs on needle.
Skip stitchesWrong needle/damaged needleReplace needle; ensure correct needle for fabric.
Machine jamsThread buildup/poor quality threadClean bobbin area; use quality thread; check bobbin insertion.
Uneven stitchesTension issues/thread qualityAdjust upper and bobbin tension; use better quality thread.
No powerPower connection/foot pedalCheck power cord; ensure foot pedal is properly connected.
Needle breaksBent needle/wrong installationReplace needle; ensure flat side faces correct direction.

Service: 1-800-NEW-HOME; www.newhomesewing.com

New Home Light Running Sewing Machine Manual © - All Rights Reserved 2025