New Home Janome 632 Sewing Machine Instruction Manual

The New Home Janome 632 is a versatile household sewing machine featuring straight stitch, zigzag stitch, buttonhole function, free arm capability, built-in stitch patterns, adjustable stitch length and width, reverse sewing, drop feed for darning and free-motion sewing, built-in thread cutter, and easy bobbin winding system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Free arm sewing surface, Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Bobbin winder, Thread tension dial, Presser foot lifter.

Installation & Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into appropriate outlet.
3. Install foot controller and connect to machine.
4. Install needle following proper orientation (flat side to back).
5. Wind and install bobbin according to instructions.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; test basic functions.

1. Thread upper thread following numbered guide on machine.
2. Insert bobbin with thread unwinding counterclockwise.
3. Select straight stitch with medium length setting.
4. Place fabric under presser foot and lower foot lever.
5. Gently press foot controller to begin sewing.
6. Practice on scrap fabric before starting projects.

CAUTION! Always use the correct needle and thread for your fabric type. Never pull fabric while sewing.

Specifications

• Machine Type: Household mechanical sewing machine
• Stitch Patterns: 12 built-in stitches including straight, zigzag, stretch, and decorative
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Buttonhole: One-step automatic
• Bobbin: Top loading, Class 15
• Needle System: HAx1, 130/705 H
• Max Sewing Speed: 800 stitches per minute
• Power Supply: 110-120V, 60Hz
• Dimensions: Standard household sewing machine size
• Weight: Approximately 12 lbs

Controls and Settings

Main controls located on front and side of machine.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Control zigzag width. Reverse: Hold button for backward stitching. Thread Tension: Adjust for balanced stitches. Presser Foot Pressure: Adjust for fabric thickness.

Basic Settings: Normal tension 4-5, Standard stitch length 2.5mm, Zigzag width 3-4mm for general sewing.

Stitch Selection

Choose appropriate stitch for your project.

1. Straight Stitch: For basic seams, topstitching, and basting
2. Zigzag Stitch: For finishing edges, appliqué, and stretch fabrics
3. Stretch Stitches: For knit fabrics and elastic seams
4. Decorative Stitches: For embellishment and decorative sewing
5. Buttonhole: Automatic one-step buttonhole for consistent results

Tip: Always test stitch on scrap fabric before sewing your project.

Threading & Bobbin

Proper threading is essential for good stitch quality.

1. Raise presser foot and raise needle to highest position.
2. Follow numbered threading guide from spool pin to needle.
3. Wind bobbin with thread passing through bobbin winding tension.
4. Insert bobbin with thread unwinding counterclockwise.
5. Pull bobbin thread up through throat plate.
6. Hold both threads under presser foot when starting to sew.

WARNING! Ensure machine is turned off during threading. Always use same thread type in bobbin and needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean lint from bobbin area after each project.
2. Oil machine according to maintenance schedule.
3. Replace needle regularly (every 8-10 hours of sewing).
4. Check and clean feed dogs periodically.
5. Store machine covered when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included with machine.

Safety Information

Important safety precautions for machine operation.

• Always disconnect power when machine is not in use
• Keep fingers away from moving needle
• Do not operate with damaged cord or plug
• Use proper lighting when sewing
• Keep long hair and loose clothing away from moving parts
• Do not use machine if it has been dropped or damaged
• Supervise children and inexperienced users
• Only use accessories recommended by manufacturer

Troubleshooting

Service: For technical support, contact authorized Janome service center. Visit www.janome.com for service locations.