New Home 692 Sewing Machine Manual

The New Home 692 is a versatile household sewing machine featuring straight stitch, zigzag stitch, buttonhole function, reverse stitching, adjustable stitch length and width, built-in needle threader, drop feed for free-motion sewing, built-in light, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing head with built-in stitch patterns, Foot pedal, Power cord, Bobbin case, Multiple presser feet, Thread spool pins.

Feature	Description
Stitch selection dial	For selecting straight, zigzag, and decorative stitches
Stitch length control	Adjusts stitch length from 0-4mm
Stitch width control	Adjusts zigzag width from 0-5mm
Reverse stitch lever	For reinforcing stitches at beginning and end
Built-in needle threader	Assists with threading the needle
Drop feed lever	Lowers feed dogs for free-motion sewing
Buttonhole foot	Creates automatic buttonholes in one step
Built-in work light	Illuminates sewing area
Bobbin winder	Winds thread onto bobbin automatically
Power switch	Turns machine on/off

Installation

Unpack and inspect contents. Place on stable sewing table.

Attach foot pedal: Connect pedal cable to machine port.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Wind bobbin: Place bobbin on winder, thread through tension disc.
Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Setup

Power on machine; test basic functions.

Thread machine: Follow numbered threading guide on machine.
Test stitches: Select straight stitch, place fabric under presser foot.
Adjust tension: Test on scrap fabric; adjust upper tension if needed.
Set stitch length: Start with medium setting (2.5) for general sewing.
Practice controls: Familiarize with reverse, stitch selection, and speed control.

CAUTION! Always turn hand wheel toward you; never force machine.

Specifications

Machine Type: Household sewing machine
Stitch Types: Straight, zigzag, blind hem, stretch, decorative
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonhole: One-step automatic
Presser Feet: Standard, zipper, buttonhole, button sewing, blind hem
Bobbin: Front loading, class 15 transparent
Power Source: 120V AC, 60Hz
Speed Control: Foot pedal with variable speed

Controls and Settings

Main controls located on front and top of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse stitch lever.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Control zigzag width. Reverse: Hold lever for backstitching. Tension: Upper thread tension dial (4-6 for normal fabrics). Presser Foot Pressure: Adjust for different fabric weights.

Connecting Accessories

Various presser feet for different sewing tasks.

Turn off machine before changing accessories.
Raise presser foot lever to highest position.
Remove current foot by pressing release lever.
Snap new foot into place until it clicks.
Lower presser foot before sewing.

Tip: Match foot to sewing task for best results.

Basic Sewing Operations

Step-by-step guide for common sewing tasks.

Straight stitching: Select straight stitch, set length to 2.5.
Zigzag stitching: Select zigzag, adjust width as needed.
Buttonholes: Attach buttonhole foot, select buttonhole stitch.
Reverse stitching: Hold reverse lever to secure stitches.
Bobbin winding: Place spool on pin, thread through guides.
Needle changing: Loosen clamp screw, replace needle.
Free-motion: Drop feed dogs, use darning foot.

WARNING! Always disconnect power when changing needles or cleaning.

Maintenance Features

Built-in maintenance functions for optimal performance.

Needle Threader: Push lever down to automatically thread needle. Bobbin Warning: Visual indicator when bobbin is low. Drop Feed: Lower feed dogs for quilting and darning. Built-in Light: Illuminates work area for precision sewing.

Care & Cleaning

Regular maintenance ensures long machine life.

Unplug machine before cleaning.
Remove needle plate to clean lint from bobbin area.
Use small brush to remove dust and thread particles.
Wipe exterior with soft, dry cloth.
Oil moving parts as specified in maintenance section.

CAUTION! Never use compressed air; it can force lint deeper into machine.

Regulatory Information

UL Listed: Complies with UL safety standards. Copyright © 2025 New Home Sewing Company. All rights reserved. For technical support, visit www.newhome-sewing.com or contact 1-800-555-6920. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot pedal is connected properly.
Thread breaking	Tension/needle	Check threading; reduce tension; replace damaged needle.
Uneven stitches	Threading/tension	Re-thread machine; check bobbin; adjust tension settings.
Fabric not feeding	Feed dogs	Ensure feed dogs are raised; check presser foot pressure.
Needle hitting plate	Needle position	Ensure needle is inserted correctly; check for bent needle.
Bobbin issues	Winding/insertion	Rewind bobbin evenly; ensure bobbin is inserted correctly.

Service: 1-800-555-6920; www.newhome-sewing.com