New Home 592 Sewing Machine Manual

The New Home 592 is a versatile sewing machine featuring multiple stitch patterns, automatic needle threading, built-in buttonholer, adjustable stitch length and width, free arm capability, drop feed for darning and quilting, built-in LED light, foot pedal control, and accessory storage. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing head with free arm, Foot pedal, Power cord, Accessory box with presser feet, Bobbins, Needles, Seam ripper, Screwdriver.

Feature	Description
Stitch patterns	12 built-in stitches including straight, zigzag, stretch, and decorative
Automatic needle threader	Easy threading with built-in mechanism
Built-in buttonholer	One-step automatic buttonholes
Free arm capability	Removable extension table for sewing sleeves and cuffs
Drop feed	For darning, quilting, and free-motion sewing
LED work light	Built-in illumination for sewing area
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Reverse stitch	Button for reinforcing stitches
Bobbin winding	Built-in bobbin winder on machine

Unpacking and Setup

Unpack and inspect all contents. Place on stable surface at comfortable working height.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port and place on floor.
Set up extension table: Attach for flatbed sewing or remove for free arm.
Install needle: Use screwdriver to secure needle with flat side to rear.

WARNING! Machine is heavy; lift with care. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow threading guide printed on machine.
Wind bobbin: Place empty bobbin on winder and thread through tension disc.
Insert bobbin: Drop bobbin into case following directional arrow.
Select stitch: Turn pattern dial to desired stitch.
Test sew: Use scrap fabric to adjust tension and stitch settings.

CAUTION! Always turn off power when changing needles or performing maintenance.

Specifications

Machine Type: Electronic sewing machine
Stitch Patterns: 12 built-in stitches
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonholes: One-step automatic
Needle Positions: Left, center, right
Free Arm: Yes, with removable extension table
Lighting: Built-in LED
Power Source: 120V AC, 60Hz
Speed Control: Foot pedal with variable speed

Controls and Settings

Main controls: Power switch, Stitch pattern dial, Stitch length dial, Stitch width dial, Reverse stitch button, Bobbin winder.

Stitch Selection: Turn pattern dial to select from straight, zigzag, stretch, blind hem, decorative stitches. Stitch Length: Adjust for fabric type (shorter for fine fabrics, longer for heavy fabrics). Stitch Width: Adjust zigzag and decorative stitch width. Reverse: Hold button for backstitching at beginning and end of seams.

Stitch Selection

Available stitches and recommended uses:

Straight stitch: Basic sewing, topstitching (length 2.0-2.5mm)
Zigzag stitch: Seam finishing, appliqué (width 2-4mm)
Blind hem stitch: Nearly invisible hems
Stretch stitch: Knits and stretch fabrics
Decorative stitches: 7 patterns for embellishment
Buttonhole: Automatic one-step buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position.
Follow numbered threading guide on machine.
Use automatic needle threader: Lower lever and hook thread through needle.
Wind bobbin: Place on winder, thread through tension, press pedal.
Insert bobbin: Follow directional arrow in bobbin case.
Pull up bobbin thread: Hold top thread, turn hand wheel toward you.

WARNING! Ensure machine is off when threading bobbin area.

Maintenance & Cleaning

Unplug before maintenance. Regular cleaning prevents lint buildup.

Remove needle plate: Use screwdriver to access bobbin area.
Clean lint: Use small brush to remove lint from feed dogs and bobbin case.
Oil machine: Apply sewing machine oil to moving parts as directed in manual.
Replace needle: Change needle after every project or 8 hours of sewing.

CAUTION! Use only sewing machine oil; other oils can damage mechanism.

Regulatory Information

UL listed; complies with safety standards for household sewing machines. Copyright © 2025 New Home; trademarks of Janome Corporation. For support, visit www.newhome.com or contact 1-800-631-0183. Made for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Rethread completely; adjust tension; check for burrs on needle.
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type.
Bobbin thread bunching	Incorrect bobbin threading	Rethread bobbin; check bobbin case for lint.
Machine not feeding	Feed dogs lowered	Raise feed dogs; clean feed dog area.
No power	Power connection	Check power cord; ensure outlet is working; check foot pedal connection.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; rethread both top and bobbin.

Service: 1-800-631-0183; www.newhome.com