Nelco Ultra Sewing Machine Manual

The Nelco Ultra Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in LED light, free arm capability, reverse stitching function, bobbin winding system, and easy tension control. Powered by 220V AC, 50Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Stitch selection dial, tension control dial, reverse stitch button, bobbin winder, presser foot lever, free arm, built-in LED light, foot pedal control.

FeatureDescription
Stitch selection dialSelect from 12 built-in stitch patterns
Tension control dialAdjust thread tension for different fabrics
Reverse stitch buttonReinforce seams at beginning and end
Bobbin winderAutomatic bobbin winding system
Presser foot leverRaise and lower presser foot
Free armFor sewing sleeves and cuffs
Built-in LED lightIlluminates sewing area
Foot pedal controlVariable speed control
Automatic needle threaderEasy needle threading system
Stitch length dialAdjust stitch length from 0-4mm

Installation & Setup

Unpack and inspect contents. Place on stable, flat surface.

  1. Remove all packaging materials and protective covers.
  2. Attach foot pedal: Connect to machine's pedal port.
  3. Plug into AC power outlet (220V, 50Hz).
  4. Install needle: Loosen needle clamp screw, insert needle with flat side facing back.
  5. Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needle.

First-Time Operation

Power on machine; follow step-by-step threading guide.

  1. Thread upper thread: Follow numbered threading path on machine.
  2. Insert bobbin: Open bobbin cover, insert bobbin with thread unwinding counterclockwise.
  3. Select stitch: Turn stitch selection dial to desired pattern.
  4. Adjust settings: Set stitch length and tension according to fabric.
  5. Test sew: Use scrap fabric to test stitch quality.

CAUTION! Always start with slow speed when learning. Keep work area clean and well-lit.

Specifications

Controls and Settings

Main controls located on front and top of machine.

Front Panel: Stitch selection dial, stitch length dial, reverse stitch button, bobbin winder stop.

Top Controls: Handwheel, spool pins, tension dial, presser foot lever, needle threader.

Stitch Selection: Straight stitch, zigzag, stretch stitches, decorative stitches. Tension Control: Adjust for different fabric types (2-6 for normal fabrics). Stitch Length: 0-4mm (0 for darning, 4 for basting). Reverse Stitching: Hold button while sewing to reinforce seams.

Stitch Selection

12 built-in stitch patterns for various sewing needs.

  1. Straight Stitch: Basic sewing, topstitching (position 1)
  2. Zigzag Stitch: Overcasting, applique (position 2)
  3. 3-Step Zigzag: Stretch fabrics, mending (position 3)
  4. Blind Hem: Nearly invisible hems (position 4)
  5. Elastic Stitch: Sewing elastic, decorative (position 5)
  6. Shell Stitch: Decorative edge finishing (position 6)
  7. Scallop Stitch: Decorative edge (position 7)
  8. Smocking Stitch: Decorative gathering (position 8)
  9. Quilting Stitch: Quilting projects (position 9)
  10. Buttonhole: Automatic 4-step buttonhole (position 10-12)

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

  1. Upper Threading: Raise presser foot, follow numbered path, use automatic needle threader.
  2. Bobbin Winding: Place spool on pin, thread through bobbin winder tension, press pedal.
  3. Bobbin Insertion: Open cover, insert with thread unwinding counterclockwise, pull thread through slot.
  4. Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you to catch bobbin thread.

WARNING! Ensure machine is turned off during threading. Keep threads untangled.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
  3. Monthly: Clean tension discs with soft brush.
  4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Included accessories for various sewing tasks.

AccessoryUse
All-purpose footGeneral sewing
Zipper footInstalling zippers
Buttonhole footMaking buttonholes
Darning plateFree-motion sewing
Seam ripperRemoving stitches
BrushCleaning lint
Extra needlesReplacement needles
Empty bobbinsAdditional bobbins
ScrewdriverNeedle replacement

Safety Information

Important safety precautions for safe operation.

Emergency: Turn off power immediately if machine malfunctions.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect tension/threadingRethread machine; adjust tension; check for burrs on needle
Skipped stitchesWrong needle/damaged needleReplace needle; ensure correct needle type for fabric
Uneven stitchesIncorrect tensionAdjust upper and bobbin tension; clean tension discs
Machine jamsThread buildupRemove bobbin case; clean area; rethread properly
No powerPower connectionCheck plug connection; ensure foot pedal is connected
Needle breaksBent needle/wrong sizeReplace needle; ensure needle is inserted correctly
Fabric not feedingPresser foot pressureClean feed dogs; check presser foot is lowered

Service: Contact authorized Nelco service center for technical issues.

Support: www.nelcosewing.com or call 1-800-NELCO-SEW

Nelco Ultra Sewing Machine Manual © - All Rights Reserved 2025