Necchi Sewing Machine Model 4575 Manual

The Necchi Model 4575 is a versatile household sewing machine featuring multiple stitch patterns, automatic buttonholer, free arm capability, built-in needle threader, adjustable stitch length and width, drop feed for darning and free-motion sewing, and built-in lighting. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Free arm sewing surface, built-in stitch patterns, automatic buttonholer, drop feed mechanism, built-in needle threader, accessory storage compartment.

Unpacking and Setup

Unpack and inspect contents. Place on stable sewing table.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot control: Connect foot pedal to machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions in manual.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow setup procedures.

1. Thread machine: Follow threading path marked on machine.
2. Insert bobbin: Place bobbin in bobbin case with thread unwinding counterclockwise.
3. Select stitch: Turn stitch pattern dial to desired setting.
4. Adjust tension: Set thread tension according to fabric type.
5. Test sew: Use scrap fabric to test stitch quality.

CAUTION! Keep fingers away from moving needle. Always turn off when not in use.

Specifications

• Model: Necchi 4575
• Stitch Patterns: 20 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Buttonhole: One-step automatic
• Maximum Sewing Speed: 800 stitches per minute
• Needle System: HA-1, 130/705 H
• Bobbin: Class 15 transparent
• Power Source: 120V AC, 60Hz
• Machine Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls: Stitch pattern dial, stitch length dial, stitch width dial, reverse stitch button, power switch.

Stitch Selection: Turn pattern dial to select from straight, zigzag, stretch, and decorative stitches.

Tension Control: Upper thread tension dial (0-9), bobbin tension screw adjustment. Presser Foot: Multiple presser feet included for different functions. Feed Dogs: Drop feed lever for free-motion work. Built-in Light: On/off with power switch.

Stitch Selection

Select from 20 built-in stitch patterns:

1. Straight Stitch: For basic sewing and seams
2. Zigzag Stitch: For finishing edges and appliqué
3. Blind Hem Stitch: For invisible hemming
4. Stretch Stitches: For knit fabrics
5. Decorative Stitches: For embellishment
6. Buttonhole: Automatic one-step buttonhole

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs
2. Weekly: Oil machine according to lubrication points diagram
3. Monthly: Clean race hook and surrounding mechanism
4. As needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included:

Regulatory Information

UL Listed: Certified for household use in United States and Canada. Copyright © 2025 Necchi; trademarks of Necchi Sewing Machine Company. For support, visit www.necchi.com or contact 1-800-555-1234.

Troubleshooting

Service: 1-800-555-1234; www.necchi.com