Morse Super Dial Sewing Machine Manual

The Morse Super Dial is a versatile sewing machine featuring a built-in stitch selector dial, automatic buttonholer, reverse stitching capability, built-in light, free arm design, and variable speed control. This electro-mechanical machine operates on 120V AC and includes multiple built-in stitches, zigzag capability, and easy threading system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Stitch selector dial, Reverse stitch lever, Bobbin winder, Thread tension dial, Presser foot lifter, Free arm, Built-in light, Foot pedal control.

FeatureDescription
Stitch selector dialSelects from multiple built-in stitch patterns
Reverse stitch leverFor reinforcing stitches at beginning and end
Bobbin winderAutomatically winds bobbin when engaged
Thread tension dialAdjusts upper thread tension (0-9)
Presser foot lifterRaises and lowers presser foot
Free arm designAllows sewing of sleeves and other tubular items
Built-in lightIlluminates sewing area
Foot pedal controlVariable speed control via foot pedal
Automatic buttonholerCreates perfect buttonholes in one step
Stitch length dialAdjusts stitch length (0-4mm)

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface.

  1. Remove machine from packaging: Carefully lift machine from box.
  2. Attach foot pedal: Connect foot pedal cord to machine port.
  3. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
  4. Connect power: Plug power cord into machine and wall outlet.
  5. Install accessories: Attach standard presser foot and thread spool pin.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow setup steps for initial use.

  1. Thread machine: Follow threading diagram on machine.
  2. Wind bobbin: Place bobbin on winder, engage bobbin winding mechanism.
  3. Insert bobbin: Remove bobbin case, insert bobbin with thread unwinding counterclockwise.
  4. Select stitch: Turn stitch selector dial to desired pattern.
  5. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selector dial, Stitch length dial, Reverse stitch lever, Bobbin winder, Thread tension dial.

Stitch Selection: Turn dial to select straight stitch, zigzag, stretch stitches, blind hem, decorative stitches. Stitch Length: Adjust from 0 (basting) to 4 (long stitches). Thread Tension: Adjust for different fabrics (lower for lightweight, higher for heavyweight). Reverse Stitching: Hold lever for backstitching at beginning and end of seams.

Stitch Selection

Dial includes 12 stitch positions with clear symbols.

  1. Straight Stitch: Position 1 - Basic sewing, topstitching
  2. Zigzag Stitch: Position 2 - Finishing edges, appliqué
  3. Stretch Stitch: Position 3-5 - Knits and stretch fabrics
  4. Blind Hem: Position 6 - Nearly invisible hems
  5. Decorative Stitches: Position 7-11 - Shell, scallop, honeycomb
  6. Buttonhole: Position 12 - 4-step automatic buttonhole

Tip: Always test stitch on scrap fabric before sewing project.

Threading and Bobbin

Proper threading is essential for good stitch quality.

  1. Upper Threading: Follow numbered path - spool pin, thread guide, tension discs, take-up lever, needle.
  2. Bobbin Winding: Place spool on pin, thread through bobbin winder tension, place bobbin on spindle, push to engage.
  3. Bobbin Insertion: Remove bobbin case, insert bobbin with thread unwinding counterclockwise, pull thread through slot.
  4. Bring Up Bobbin Thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.

WARNING! Always turn power off when threading needle. Keep fingers clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil hook race and moving parts with sewing machine oil.
  3. Monthly: Clean tension discs with folded fabric or dental floss.
  4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Standard accessories included with machine.

AccessoryUse
Standard Presser FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootMaking buttonholes
Blind Hem FootCreating invisible hems
Seam RipperRemoving stitches
BrushCleaning lint
Extra BobbinsAdditional thread colors
NeedlesVarious sizes for different fabrics

Safety Information

Always follow safety guidelines to prevent injury.

EMERGENCY: Turn off power immediately if machine malfunctions.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRethread completely; adjust tension; check for burrs on needle.
Skipped stitchesWrong needle/damaged needleReplace needle; ensure correct needle for fabric type.
Uneven stitchesIncorrect tensionAdjust upper and bobbin tension; clean tension discs.
Machine won't runPower/pedal issueCheck power connection; ensure pedal cord is plugged in securely.
Bobbin thread bunchingIncorrect bobbin threadingRemove and rethread bobbin; check bobbin case for lint.
Noisy operationLack of lubrication/lintClean and oil machine; check for loose parts.

Service: For technical support, contact Morse Customer Service at 1-800-555-SEWING or visit www.morsesewing.com

Morse Super Dial Sewing Machine Manual © - All Rights Reserved 2025