Montgomery Ward Signature Deluxe Sewing Machine Manual

The Montgomery Ward Signature Deluxe Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, reverse stitching, built-in light, and various presser feet for different sewing applications. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with free arm, Stitch pattern selector, Stitch length dial, Stitch width dial, Reverse stitch button, Built-in light, Bobbin winder, Presser foot lever, Hand wheel.

Installation and Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove machine from packaging: Carefully lift machine from box, remove all protective materials.
2. Attach extension table: Slide extension table into position until it clicks into place.
3. Connect foot pedal: Plug foot pedal cord into machine's pedal port.
4. Connect power: Plug power cord into machine and electrical outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.

WARNING! Keep fingers away from needle area during setup and operation. Always unplug when not in use.

First-Time Operation

Power on machine; test basic functions before sewing.

1. Thread upper thread: Follow numbered threading guide on machine.
2. Wind bobbin: Place empty bobbin on winder, guide thread through tension disc, press pedal.
3. Insert bobbin: Open bobbin cover, drop in bobbin with thread unwinding counterclockwise.
4. Test stitches: Select straight stitch, medium length, and test on scrap fabric.
5. Adjust tension: Check stitch formation and adjust tension dial if needed.

CAUTION! Always start with needle in highest position. Keep work area clean and well-lit.

Specifications

• Machine Type: Electric household sewing machine
• Stitch Patterns: 12 built-in stitches including straight, zigzag, blind hem
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm for zigzag
• Buttonhole: One-step automatic
• Free Arm: Yes, with removable extension table
• Lighting: Built-in LED light
• Power Source: 120V AC, 60Hz
• Bobbin Type: Class 15 transparent bobbin
• Needle System: HAx1 domestic needles

Controls and Settings

Main controls located on front and side of machine. Stitch pattern selector, stitch length dial, stitch width dial, reverse button, hand wheel.

Stitch Selection: Turn pattern dial to desired stitch symbol. Stitch Length: 0-4mm (0 for darning, 4 for basting). Stitch Width: 0-5mm for zigzag and decorative stitches. Reverse: Press and hold for backstitching. Tension Dial: 0-9 (4-5 for normal sewing).

Stitch Selection Guide

Recommended settings for common fabrics and applications.

1. Straight Stitch: General sewing, length 2.5mm, width 0mm
2. Zigzag Stitch: Seam finishing, appliqué, length 2.0mm, width 3.0mm
3. Blind Hem: Hemming garments, length 2.5mm, width 2.0mm
4. Stretch Stitch: Knits and stretch fabrics, length 2.5mm, width 2.5mm
5. Decorative Stitches: Embellishments, length 2.0mm, width 4.0mm
6. Buttonhole: Automatic one-step, follow marked fabric placement

Tip: Always test stitches on scrap fabric before sewing your project.

Threading and Bobbin

Proper threading is essential for good stitch quality.

1. Upper Threading: Raise presser foot, raise needle to highest position, follow numbered guide.
2. Bobbin Winding: Place spool on pin, thread through guide, wrap around bobbin 2-3 times, press pedal.
3. Bobbin Insertion: Open cover, drop bobbin in with thread unwinding counterclockwise, pull thread through slot.
4. Bring Up Bobbin Thread: Hold upper thread, turn hand wheel toward you until needle goes down and up, pull upper thread to bring up bobbin thread.
5. Thread Both Under Presser Foot: Pull both threads under and toward back of machine.

WARNING! Ensure machine is unplugged when threading needle or changing bobbin.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs. Weekly: Oil moving parts with sewing machine oil (2-3 drops). Monthly: Clean tension discs with soft brush. Storage: Cover machine when not in use, store in dry area.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories Included

Regulatory Information

UL Listed: Complies with UL safety standards. Copyright © Montgomery Ward. For technical support or service, contact Montgomery Ward Customer Service at 1-800-347-7869 or visit www.montgomeryward.com. Made for household use only.

Troubleshooting

Service: 1-800-347-7869; www.montgomeryward.com