Montgomery Ward Signature 2000 Sewing Machine Manual

The Montgomery Ward Signature 2000 is a versatile electric sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, reverse stitching, and variable speed control. This manual covers safety instructions, machine features, threading, basic operations, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Machine Setup 3. Basic Operations 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading Instructions 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Built-in stitch patterns, free arm, reverse stitch, bobbin winder, tension control, presser foot pressure adjustment.

FeatureDescription
Stitch PatternsMultiple built-in stitches including straight, zigzag, decorative
Free ArmRemovable extension for sewing cuffs and sleeves
Reverse StitchReinforce seams at beginning and end
Bobbin WinderBuilt-in automatic bobbin winding system
Tension ControlAdjustable upper thread tension
Stitch Length/WidthVariable adjustment for different fabrics
ButtonholerOne-step automatic buttonhole function
Speed ControlVariable sewing speed with foot pedal
Presser FeetMultiple interchangeable feet included
LightBuilt-in work area illumination

Machine Setup

Unpack and inspect all components. Place on stable, level surface.

  1. Remove machine from packaging and remove all protective materials.
  2. Attach power cord to machine and plug into 120V AC outlet.
  3. Install foot pedal and connect to machine.
  4. Remove free arm extension for regular sewing or attach for free arm work.
  5. Install needle following proper orientation.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

Basic Operations

Power on machine; test functions before beginning project.

  1. Thread machine: Follow threading diagram for upper and lower threading.
  2. Select stitch: Turn pattern selector to desired stitch.
  3. Adjust settings: Set stitch length and width as needed.
  4. Insert fabric: Lower presser foot and begin sewing.
  5. Use reverse: Engage reverse lever to reinforce stitches.

CAUTION! Always turn hand wheel toward you. Never force the machine.

Specifications

Controls and Settings

Main controls: Stitch pattern selector, stitch length dial, stitch width dial, reverse stitch lever, tension dial.

Stitch Selection: Rotate pattern dial to select desired stitch. Stitch Length: Adjust from 0 (darning) to 4 (basting). Stitch Width: Adjust zigzag and decorative stitch width. Tension: Adjust upper thread tension (4 is normal). Presser Foot Pressure: Adjust for different fabric weights.

Stitch Selection

Available stitches: Straight, zigzag, multiple stretch and decorative stitches.

  1. Straight Stitch: For basic seams, topstitching
  2. Zigzag Stitch: For finishing edges, appliqué
  3. Blind Hem: Nearly invisible hemming
  4. Stretch Stitches: For knit fabrics
  5. Decorative Stitches: Multiple pattern options
  6. Buttonhole: Automatic one-step buttonhole

Tip: Test stitch on scrap fabric before sewing project.

Threading Instructions

Proper threading is essential for good stitch quality.

  1. Raise presser foot and needle to highest position.
  2. Place spool on spool pin and follow threading path.
  3. Thread through tension discs and take-up lever.
  4. Thread needle from front to back.
  5. Wind bobbin and insert in bobbin case.
  6. Pull up bobbin thread by turning hand wheel.

WARNING! Ensure machine is unplugged during threading. Keep fingers clear of needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean lint and dust from bobbin area after each project.
  2. Oil moving parts as specified in lubrication points diagram.
  3. Check needle regularly; replace if bent or dull.
  4. Clean feed dogs with small brush.
  5. Store machine covered when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oil.

Accessories

Standard accessories included with machine.

AccessoryPurpose
All-purpose footGeneral sewing
Zipper footInstalling zippers
Buttonhole footMaking buttonholes
Darning plateFree-motion sewing
Additional bobbinsExtra thread colors
NeedlesReplacement needles
ScrewdriverNeedle plate removal
Seam ripperRemoving stitches
Spool capsDifferent spool types

Safety Information

Important safety precautions for machine operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRethread machine; adjust tension; check for burrs on needle
Skip stitchesWrong needle/damaged needleReplace needle; ensure proper insertion; check thread quality
Uneven stitchesTension issuesAdjust upper and bobbin tension; rethread completely
Machine won't runPower/mechanical issueCheck power connection; ensure foot pedal is connected; check for jams
Fabric not feedingPresser foot pressureAdjust presser foot pressure; clean feed dogs; check stitch length
Noisy operationLint/lack of oilClean and oil machine; check for loose parts

Service: For technical support, contact Montgomery Ward customer service. Authorized service centers available for repairs.

Montgomery Ward Signature 2000 Sewing Machine Manual © - All Rights Reserved 2025