Model 600 Dressmaker Sewing Machine Manual

The Model 600 Dressmaker Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, automatic needle threader, drop feed for darning and quilting, built-in light, reverse stitching, and variable speed control. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Sewing head with free arm, Foot pedal, Power cord, Accessory box with presser feet, Bobbins, Needles, Seam ripper, Brush, Screwdriver.

Feature	Description
Stitch patterns	12 built-in stitches including straight, zigzag, stretch, and decorative
Buttonholer	One-step automatic buttonhole
Free arm	Removable extension table for sewing sleeves and cuffs
Needle threader	Built-in automatic needle threading system
Drop feed	Lower feed dogs for darning and free-motion quilting
Reverse stitch	Button for reinforcing stitches at beginning and end
Stitch length control	Adjustable from 0-4mm
Stitch width control	Adjustable from 0-5mm
Variable speed	Foot pedal controls sewing speed
Built-in light	LED work area illumination

Installation & Setup

Unpack and inspect contents. Place on stable surface at comfortable working height.

Remove machine from packaging: Lift by carrying handle, remove protective materials.
Attach extension table: Slide onto free arm until it clicks into place.
Connect foot pedal: Plug into machine socket.
Connect power: Plug power cord into machine and wall outlet.
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Plug in machine and turn on power switch.

Wind bobbin: Place empty bobbin on winder, thread through tension disc, press pedal to wind.
Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
Thread upper thread: Follow numbered threading path from spool to needle.
Use needle threader: Lower lever to automatically thread needle.
Test stitches: Select straight stitch, place fabric under presser foot, and sew slowly.

CAUTION! Always raise needle to highest position before removing fabric.

Specifications

Machine Type: Electronic household sewing machine
Stitches: 12 built-in patterns
Stitch Length: 0-4mm adjustable
Stitch Width: 0-5mm adjustable
Buttonhole: One-step automatic
Needle System: HAx1 standard domestic needles
Bobbin: Class 15 transparent
Max Sewing Speed: 800 stitches per minute
Power Requirements: 120V AC, 60Hz
Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Power switch, Built-in light switch.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for wider/narrower zigzag. Reverse: Hold button to sew backwards. Tension: Upper thread tension dial (4-6 for normal sewing). Presser Foot Pressure: Adjustable for different fabric weights.

Stitch Selection

12 built-in stitches for various sewing applications.

Straight Stitch: Position 1 - General sewing, topstitching
Zigzag Stitch: Position 2 - Overcasting, appliqué, stretch fabrics
3-Step Zigzag: Position 3 - Mending, elastic application
Blind Hem: Position 4 - Nearly invisible hemming
Stretch Stitch: Position 5 - Knits and stretch fabrics
Decorative Stitches: Positions 6-12 - Various decorative patterns
Buttonhole: Special position - Automatic one-step buttonhole

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

Upper Threading: Follow numbered path from spool pin to needle.
Needle Threader: Lower lever until hook catches thread, then pull back.
Bobbin Winding: Place bobbin on winder, thread through tension, press pedal.
Bobbin Insertion: Open cover, drop bobbin in case with thread counterclockwise.
Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you.

WARNING! Always use same thread type in bobbin and needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil hook race and moving parts with sewing machine oil.
Monthly: Clean tension discs with folded fabric or dental floss.
Needle Replacement: Change needle after 8-10 hours of sewing.
Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance.

Regulatory Information

UL Listed: Certified for household use in United States and Canada. Copyright © 2025 Dressmaker Sewing Company. All rights reserved. For technical support, visit www.dressmakersewing.com or contact 1-800-555-SEWING. Serial number located on machine base.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't run	Power connection	Check power cord; ensure switch is on; check outlet.
Thread breaking	Tension/thread quality	Rethread machine; adjust tension; use quality thread.
Skipped stitches	Needle/blunt needle	Replace needle; ensure correct insertion; check thread.
Uneven stitches	Threading/tension	Rethread completely; clean tension discs; adjust tension.
Fabric not feeding	Feed dogs lowered	Raise feed dogs; check presser foot pressure.
Noisy operation	Lint/lack of oil	Clean and oil machine; check for thread jams.

Reset: Turn power off and on to reset electronic controls.

Service: 1-800-555-SEWING; www.dressmakersewing.com