Mini Rex Sewing Machine Manual

The Mini Rex Sewing Machine is a compact, portable sewing device designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in LED light, free arm capability, automatic needle threader, top drop-in bobbin system, and easy stitch selection. Powered by 110-120V AC, this machine is ideal for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact sewing machine body, built-in stitch patterns, free arm, LED work light, automatic needle threader, top-load bobbin system, foot pedal control, and accessory storage.

Installation & Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging and remove all protective materials.
2. Attach foot pedal: Connect foot pedal cable to machine port.
3. Connect power: Plug power cord into machine and wall outlet (110-120V).
4. Install needle: Loosen needle clamp screw, insert needle with flat side toward back, tighten screw.
5. Wind bobbin: Follow bobbin winding instructions in threading section.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow setup steps for initial use.

1. Thread machine: Follow threading path indicated on machine body.
2. Insert bobbin: Place wound bobbin in bobbin case following directional arrows.
3. Select stitch: Choose desired stitch pattern using stitch selector dial.
4. Adjust settings: Set stitch length and width as needed for your project.
5. Test sew: Practice on scrap fabric before starting your project.

CAUTION! Always start with needle in highest position. Keep work area clean and well-lit.

Specifications

• Machine Type: Compact Electric Sewing Machine
• Stitch Patterns: 10 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Speed Control: Foot pedal variable speed
• Lighting: Built-in LED work light
• Bobbin System: Top-load, drop-in bobbin
• Needle System: Standard domestic 15x1 needles
• Power Requirements: 110-120V AC, 60Hz
• Weight: 12 lbs (5.4 kg)
• Dimensions: 14" x 7" x 11"

Controls and Settings

Main controls located on front and side of machine body.

Front Panel: Stitch selector dial, stitch length control, stitch width control, reverse stitch button, power switch.

Stitch Selection: Turn dial to select from straight stitch, zigzag, stretch stitches, and decorative patterns. Stitch Length: Adjust for shorter or longer stitches (0-4mm). Stitch Width: Adjust for narrow or wide zigzag (0-5mm). Reverse: Hold button to sew in reverse for reinforcement. Tension: Adjust thread tension dial for balanced stitches.

Stitch Selection

Machine offers variety of stitches for different sewing applications.

1. Straight Stitch: Basic sewing, seams, topstitching (position 1)
2. Zigzag Stitch: Finishing edges, appliqué, stretch fabrics (position 2)
3. Blind Hem Stitch: Nearly invisible hems (position 3)
4. Stretch Stitch: For knit and stretch fabrics (position 4)
5. Decorative Stitches: Various patterns for embellishment (positions 5-10)

Tip: Always test stitch on scrap fabric before sewing your project.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

1. Raise presser foot and needle to highest position.
2. Follow numbered threading path on machine.
3. Use automatic needle threader: Lower lever and hook thread through needle eye.
4. Bobbin winding: Place thread spool on pin, wrap thread around bobbin winder tension disk.
5. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
6. Pull bobbin thread up through needle plate slot.

WARNING! Ensure machine is powered off during threading. Keep fingers clear of moving parts.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Remove lint and dust from bobbin area and feed dogs regularly.
2. Oiling: Apply sewing machine oil to moving parts as recommended (every 3-6 months).
3. Needle replacement: Change needle after every project or 8 hours of sewing.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included with Mini Rex Sewing Machine.

Safety Information

Important safety precautions for sewing machine operation.

• Always disconnect power when changing needles, cleaning, or not in use
• Keep fingers away from moving needle and presser foot
• Do not sew over pins - remove them before they reach presser foot
• Use proper lighting to see sewing area clearly
• Keep machine away from water and moisture
• Supervise children and beginners during operation
• Use only recommended accessories and parts

Troubleshooting

Service: For technical support, contact Mini Rex Customer Service at 1-800-555-SEWING or visit www.minirexsewing.com