michley sewing machine manual

The Michley sewing machine is a versatile household sewing device designed for various fabric types, featuring multiple stitch patterns, adjustable speed control, built-in LED lighting, automatic needle threading, drop-in bobbin system, and easy-to-use controls. Suitable for beginners and experienced sewers alike, this machine offers straight stitch, zigzag, decorative stitches, and buttonhole functions. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine body, foot pedal, power adapter, accessory kit, instruction manual.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Connect power: Plug power adapter into machine and wall outlet (120V).
2. Install foot pedal: Connect to machine port and place on floor.
3. Attach accessory box: Snap into designated slot if applicable.
4. Insert needle: Ensure flat side faces back, tighten screw securely.
5. Wind bobbin: Follow bobbin winding instructions in threading section.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; LED light should illuminate.

1. Select straight stitch: Turn stitch pattern dial to straight stitch setting.
2. Set stitch length: Adjust to medium setting (2.5mm).
3. Thread machine: Follow threading path indicated on machine.
4. Insert bobbin: Place bobbin in case with thread pulling counterclockwise.
5. Test on scrap fabric: Practice stitching on fabric scrap before actual project.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

• Stitch Patterns: 12 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Speed: Up to 800 stitches per minute
• Needle: Standard domestic 15x1 needles
• Bobbin: Class 15 transparent bobbins
• Power: 120V AC, 60Hz
• Lighting: LED work light
• Weight: Approximately 12 lbs
• Warranty: 1-year limited warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch pattern dial, stitch length dial, stitch width dial, reverse stitch button, power switch.

Stitch Selection: Rotate pattern dial to desired stitch (straight, zigzag, stretch, decorative). Stitch Length: Adjust for shorter/tighter or longer/looser stitches. Stitch Width: Control zigzag and decorative stitch width. Reverse: Hold button to sew backwards for reinforcement. Tension: Upper thread tension dial (4-6 for normal fabrics).

Stitch Selection

Available stitch patterns and their applications:

1. Straight Stitch: Basic sewing, seams (length 2.5mm)
2. Zigzag Stitch: Finishing edges, stretch fabrics (width 3-4mm)
3. Blind Hem: Nearly invisible hems
4. Stretch Stitch: Knits and elastic fabrics
5. Decorative Stitches: 8 patterns for embellishment
6. Buttonhole: 4-step automatic buttonhole

Tip: Always test stitch on fabric scrap before sewing project.

Threading the Machine

Proper threading ensures smooth operation.

1. Raise presser foot and needle to highest position.
2. Place spool on pin, thread through first guide.
3. Pull down between tension discs.
4. Thread through take-up lever from right to left.
5. Pass through remaining guides to needle.
6. Use automatic needle threader or thread manually.
7. Pull thread under presser foot toward back.

WARNING! Ensure machine is off during threading. Follow numbered guides exactly.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate: Use screwdriver to access bobbin area.
3. Clean lint: Use small brush to remove lint from feed dogs and bobbin case.
4. Oil moving parts: Use sewing machine oil on designated points (see diagram).
5. Replace needle: Change needle after 8-10 hours of sewing or if damaged.

CAUTION! Use only sewing machine oil. Do not use household oils.

Accessories

Included accessories and their uses:

Safety Information

Important safety precautions for operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle
• Do not sew over pins - remove before stitching
• Use proper lighting to see work area clearly
• Keep hair and loose clothing away from machine
• Do not operate if cord or plug is damaged
• Supervise children and beginners

For support, visit www.michley.com or contact 1-800-555-SEWING.

Troubleshooting

Service: 1-800-555-SEWING; www.michley.com