Manual for Singer Sewing Machine Model 2662

The Singer Sewing Machine Model 2662 is a versatile mechanical sewing machine featuring built-in stitches, automatic needle threader, adjustable stitch length and width, free arm capability, built-in buttonhole stitch, drop feed for free-motion sewing, and reverse stitching. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Mechanical sewing machine with built-in stitches, automatic needle threader, free arm, drop feed, reverse stitch function.

FeatureDescription
Built-in stitchesMultiple stitch patterns including straight, zigzag, decorative
Automatic needle threaderEasy needle threading with push-button mechanism
Free arm capabilityConvertible for sewing sleeves and cuffs
Drop feedLower feed dogs for free-motion sewing
Reverse stitchReinforce seams with reverse stitching
Stitch length controlAdjustable stitch length dial
Stitch width controlAdjustable zigzag width
Built-in buttonholeOne-step automatic buttonhole
Power switchOn/off power control
Foot pedalVariable speed control

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

  1. Remove packaging materials and protective covers
  2. Attach power cord to machine and plug into AC outlet
  3. Install foot pedal and position for comfortable use
  4. Install sewing foot and needle according to instructions
  5. Wind and install bobbin

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

  1. Thread machine: Follow threading diagram from spool to needle
  2. Install bobbin: Place bobbin in case with thread pulling counterclockwise
  3. Select stitch: Turn stitch selection dial to desired pattern
  4. Adjust settings: Set stitch length and width as needed
  5. Test sew: Practice on scrap fabric before beginning project

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, bobbin winder.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust from 0-4mm for shorter/longer stitches. Stitch Width: Adjust zigzag width from 0-5mm. Reverse: Hold button to sew in reverse for seam reinforcement. Bobbin Winder: Wind bobbin before threading machine.

Stitch Selection

Built-in stitches for various sewing applications.

  1. Straight stitch: Basic sewing, topstitching, basting
  2. Zigzag stitch: Seam finishing, appliqué, stretch fabrics
  3. Decorative stitches: Multiple patterns for embellishment
  4. Buttonhole stitch: Automatic one-step buttonholes
  5. Blind hem stitch: Nearly invisible hems
  6. Elastic stitch: For knit and stretch fabrics

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation.

  1. Raise presser foot and needle to highest position
  2. Follow numbered threading path from spool pin to needle
  3. Use automatic needle threader: Push lever down and hook thread through needle
  4. Wind bobbin: Place thread on spool pin, through tension disc, and onto bobbin
  5. Insert bobbin: Place in bobbin case with thread pulling counterclockwise
  6. Pull up bobbin thread: Hold needle thread and turn hand wheel toward you

WARNING! Always thread with presser foot raised and power off.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning
  2. Remove needle plate and clean lint buildup
  3. Oil moving parts as recommended in lubrication chart
  4. Wipe exterior with soft, dry cloth
  5. Replace needle regularly (every 8-10 hours of sewing)
  6. Store covered when not in use

CAUTION! Use only Singer recommended oil. Do not use household oils.

Regulatory Information

UL Listed: Complies with UL safety standards. Copyright © Singer Manufacturing Company. For support, visit www.singer.com or contact 1-800-4-SINGER. Made for household use.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower connectionCheck power cord; ensure machine is turned on
Thread breakingTension/thread qualityRethread machine; check tension; use quality thread
Skip stitchesNeedle/thread mismatchReplace needle; ensure proper needle for fabric
Bobbin issuesImproper winding/insertionRewind bobbin; ensure correct insertion direction
Uneven stitchesTension settingsAdjust upper and lower tension; clean race area
Needle breakingBent needle/wrong sizeReplace needle; use correct size for fabric

Reset: Unplug for 30 seconds to reset electronic components.

Service: 1-800-4-SINGER; www.singer.com

Manual for Singer Sewing Machine Model 2662 © - All Rights Reserved 2025