Manual for Model 920 Home Sewing Machine

The Model 920 Home Sewing Machine is a versatile household sewing machine featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, automatic bobbin winding, free arm capability, LED lighting, and variable speed control. Suitable for various fabrics from lightweight to medium-weight materials. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main body with free arm, Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Built-in needle threader, Bobbin winding system, LED work light.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove all packaging materials and protective covers.
2. Attach power cord to machine and plug into standard 120V outlet.
3. Install foot pedal and position for comfortable use.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
5. Wind bobbin: Place empty bobbin on winder, thread through tension disc, press winder lever.
6. Insert bobbin: Open bobbin cover, insert bobbin with thread running counterclockwise.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow basic setup procedures.

1. Thread machine: Follow numbered threading guide on machine.
2. Select straight stitch: Turn stitch selection dial to straight stitch symbol.
3. Set stitch length: Adjust to medium setting (2.5mm).
4. Practice on scrap fabric: Test stitching on fabric scrap before actual project.
5. Adjust tension: If stitches are uneven, adjust upper thread tension dial.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

• Machine Type: Electronic home sewing machine
• Stitch Patterns: 23 built-in stitches
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable (zigzag)
• Speed: Up to 800 stitches per minute
• Needle System: HA-1, 130/705 H
• Bobbin: Class 15 transparent
• Lighting: LED work light
• Power Requirements: 120V, 60Hz
• Dimensions: 15.4" W x 7.1" H x 12.2" D
• Weight: 12.3 lbs

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Power switch.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for wider or narrower zigzag stitches. Reverse: Hold button for backstitching. Tension Control: Adjust upper thread tension (3-4 for normal fabrics).

Stitch Selection

23 built-in stitches for various sewing applications.

1. Straight Stitch: For basic seams, topstitching
2. Zigzag Stitch: For finishing edges, appliqué
3. Blind Hem Stitch: For nearly invisible hems
4. Stretch Stitches: For knit fabrics
5. Decorative Stitches: For embellishment
6. Buttonhole: 4-step automatic buttonhole

Tip: Always test stitch on fabric scrap before sewing project.

Basic Sewing Techniques

Fundamental sewing operations for beginners.

1. Starting to sew: Place fabric under presser foot, lower foot, begin sewing slowly.
2. Seam guiding: Use seam guide lines on needle plate.
3. Backstitching: Press reverse button at beginning and end of seams.
4. Turning corners: Stop with needle in fabric, lift presser foot, pivot fabric.
5. Finishing: Clip threads using built-in thread cutter.
6. Changing stitches: Always stop with needle in highest position.

WARNING! Never pull fabric while sewing - let feed dogs move fabric.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts with sewing machine oil.
3. Monthly: Clean tension discs with soft brush.
4. Needle replacement: Change needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Always unplug machine before cleaning or maintenance.

Accessories

Standard accessories included with Model 920.

Safety Information

Important safety precautions for safe operation.

• Always disconnect power when changing needles, cleaning, or not in use
• Keep fingers away from moving parts and needle area
• Do not use damaged or bent needles
• Ensure proper lighting in work area
• Keep machine stable on flat surface during operation
• Supervise children and beginners
• Avoid contact with electrical cords and foot pedal

Troubleshooting

Service: For technical support, contact 1-800-555-SEWING or visit www.model920support.com