Manual for Electra Sewing Machine Model Royal XL6000

The Electra Royal XL6000 is a versatile computerized sewing machine with 600 built-in stitches, automatic needle threader, LCD display, speed control, built-in monogramming fonts, automatic buttonholer, drop feed for free-motion sewing, adjustable presser foot pressure, and built-in LED lighting. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Advanced Functions 8. Maintenance & Care 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, LCD display, automatic needle threader, built-in LED light, drop-in bobbin system, free arm, accessory storage.

Feature	Description
Built-in stitches	600 stitch patterns including utility, decorative, and quilting
LCD display	Shows stitch selection, stitch length/width, and settings
Automatic needle threader	Easy threading with push-button operation
Automatic buttonholer	One-step buttonhole with memory function
Speed control slider	Adjustable sewing speed from slow to fast
Built-in monogramming	3 alphabet fonts for personalized stitching
Drop feed	Free-motion sewing capability
LED lighting	Bright illumination of sewing area
Start/stop button	Sew without foot control
Needle up/down	Programmable needle position

Installation & Setup

Unpack and inspect contents. Place on stable sewing table.

Remove packaging materials and protective covers.
Attach foot control pedal to machine port.
Plug power cord into machine and wall outlet.
Install needle properly with flat side toward back.
Wind and insert bobbin following threading diagram.
Thread upper thread using automatic needle threader.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow initial setup procedure.

Select basic straight stitch using stitch selection dial.
Set stitch length to medium (2.5-3.0) for general sewing.
Place fabric under presser foot and lower foot lever.
Gently press foot control to begin sewing.
Practice on scrap fabric to adjust tension and speed.
Use reverse stitch button to secure beginnings and ends.

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Model: Electra Royal XL6000
Stitches: 600 built-in patterns
Buttonholes: 10 one-step automatic styles
Max Sewing Speed: 850 stitches per minute
Needle Positions: Adjustable left/right
Presser Feet: 8 included, snap-on system
Display: LCD with stitch preview
Bobbin: Front-loading, jam-proof
Power Source: 120V AC, 60Hz
Weight: 15.4 lbs (7 kg)

Controls and Settings

Access functions via control panel and LCD display.

Main Controls: Power switch, stitch selection dial, LCD menu buttons, speed control slider, start/stop button, reverse stitch button, needle up/down button.

Stitch Settings: Length (0-5mm), width (0-7mm), mirror image, memory save/recall. Utility Settings: Automatic thread cutter, tension adjustment (0-9), presser foot pressure, needle stop position. Display Settings: Language selection, brightness adjustment, sound on/off.

Stitch Selection

Choose from 600 built-in stitches organized by category.

Turn stitch selection dial to desired stitch number.
View stitch preview on LCD display.
Adjust stitch length and width as needed.
Select mirror function for symmetrical designs.
Save favorite stitches to memory for quick access.
Use direct access buttons for common utility stitches.

Tip: Test stitches on scrap fabric first to ensure proper tension and appearance.

Advanced Functions

Automatic buttonholer: Measure button, select buttonhole style, machine sews perfect buttonhole automatically. Monogramming: Select font, use arrow keys to enter letters, machine stitches personalized text. Memory function: Save up to 50 stitch combinations for projects. Needle threader: Push lever down and forward for automatic threading. Thread cutter: Built-in cutter trims top and bobbin threads.

WARNING! Keep hands clear of moving parts during automatic functions.

Maintenance & Care

Regular cleaning and lubrication ensure optimal performance.

Clean lint from bobbin area after each project.
Oil moving parts monthly with sewing machine oil.
Replace needle after 8-10 hours of sewing.
Check belt tension periodically.
Store covered when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils and accessories.

Accessories

Included accessories: 8 snap-on presser feet (zigzag, zipper, buttonhole, blind hem, overcasting, quilting, embroidery, walking foot), assorted needles, bobbins, seam ripper, lint brush, screwdrivers, spool caps, auxiliary spool pin.

Regulatory Information

UL Listed: Certified for electrical safety. FCC Part 15: Class B digital device compliant. Copyright © 2025 Electra Sewing Machines; all rights reserved. For technical support, visit www.electrasewing.com or contact 1-800-555-ELECTRA.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord; ensure foot control is plugged in; verify power switch is on.
Thread breaking	Tension/thread quality	Reduce tension; use better quality thread; check for burrs on needle.
Skipped stitches	Needle/blunt needle	Replace needle; ensure correct needle type for fabric; rethread machine.
Bobbin thread bunching	Bobbin threading	Rethread bobbin; ensure bobbin is inserted correctly; clean bobbin area.
Uneven feeding	Presser foot pressure	Adjust presser foot pressure; clean feed dogs; check foot installation.

Reset: Turn machine off and on to reset computer functions.

Service: 1-800-555-ELECTRA; www.electrasewing.com