Manual for Brother Sewing Machine SQ9050

The Brother SQ9050 is a computerized sewing machine with 90 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, 7 styles of auto-size buttonholes, adjustable sewing speed, and multiple presser feet. Features include built-in stitch patterns (utility, decorative, heirloom), one-step buttonholer, free arm capability, and easy stitch selection. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, drop-in bobbin system, built-in needle plate, free arm, accessory compartment.

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

1. Remove packaging materials and protective covers
2. Place machine on sturdy table or sewing cabinet
3. Connect foot control pedal to machine
4. Plug power cord into electrical outlet
5. Install needle following threading diagram
6. Wind and insert bobbin
7. Thread upper thread using automatic needle threader

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow basic setup procedures.

1. Turn power switch to ON position
2. Select straight stitch using stitch selection dial
3. Place fabric under presser foot and lower foot lever
4. Press foot control gently to begin sewing
5. Practice on scrap fabric to adjust tension and speed
6. Experiment with different stitch patterns
7. Adjust stitch length and width as needed

CAUTION! Always use proper needle for fabric type. Keep work area well-lit and free of obstructions.

Specifications

• Stitch Patterns: 90 built-in stitches
• Buttonholes: 7 one-step auto-size styles
• Needle Positions: Adjustable left/right
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Bobbin System: Drop-in top loading
• Needle Threader: Automatic push-pull type
• Display: LCD with stitch indicators
• Free Arm: Yes, for cylindrical sewing
• Power Supply: 120V AC, 60Hz
• Machine Weight: 12.1 lbs (5.5 kg)

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls, reverse stitch button.

LCD Display: Shows selected stitch number, recommended foot, stitch length/width settings, error messages.

Stitch Selection: Rotate dial to choose from 90 built-in stitches. Stitch Length: Adjustable from 0-5mm. Stitch Width: Adjustable from 0-7mm. Reverse Stitch: Button for reinforcing stitches. Needle Position: Button to move needle up/down.

Stitch Selection

90 built-in stitches organized by category:

1. Utility Stitches: Straight, zigzag, stretch, overcast
2. Decorative Stitches: Scallops, waves, leaves, flowers
3. Heirloom Stitches: Satin, cross, honeycomb patterns
4. Buttonholes: 7 one-step automatic styles
5. Blind Hem: For invisible hemming
6. Quilting: Special stitches for quilt projects

Tip: Refer to stitch guide on machine for recommended settings and presser feet.

Basic Sewing Operations

Step-by-step sewing procedures:

1. Raise presser foot and position fabric
2. Lower presser foot onto fabric
3. Hold thread tails and begin sewing slowly
4. Guide fabric gently without pulling
5. Use reverse stitch to secure beginnings/ends
6. Raise needle to highest position before removing fabric
7. Trim threads using built-in thread cutter

WARNING! Never pull fabric while needle is in material. Always turn off power when not in use.

Maintenance & Cleaning

Unplug machine before maintenance. Regular cleaning prevents lint buildup.

1. Remove needle plate and clean bobbin area
2. Use small brush to remove lint from feed dogs
3. Wipe exterior with soft, dry cloth
4. Oil machine as per instruction manual (if required)
5. Replace needle regularly (every 8-10 hours of sewing)

CAUTION! Do not use compressed air for cleaning. Never immerse machine in water.

Accessories Included

Standard accessories with SQ9050:

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © 2024 Brother International Corporation. All rights reserved. For technical support and service, visit www.brother-usa.com or contact 1-877-4BROTHER. Machine complies with FCC Part 15 regulations for digital devices.

Troubleshooting

Reset: Turn machine off and on to reset computer functions.

Service: 1-877-4BROTHER; www.brother-usa.com