manual for brother sewing machine ce-5000prw

The Brother CE-5000PRW is a computerized sewing machine with 70 built-in stitches, automatic needle threader, LCD display, drop-in bobbin system, built-in monogramming fonts, and multiple presser feet. Features include adjustable stitch length and width, speed control slider, automatic thread cutter, and embroidery capabilities. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, automatic needle threader, drop-in bobbin system, stitch selection dial, speed control slider, presser foot lever, built-in needle plate.

Feature	Description
Built-in Stitches	70 utility, decorative, and quilting stitches
Automatic Needle Threader	Easy threading with push-pull mechanism
LCD Display	Shows selected stitch, length, width, and settings
Drop-in Bobbin	Top-loading bobbin system with clear cover
Speed Control Slider	Adjustable sewing speed from slow to fast
Automatic Thread Cutter	One-touch thread cutting button
Built-in Monogramming	3 alphabet fonts for personalization
Needle Up/Down	Programmable needle position
Presser Feet	Includes zigzag, buttonhole, zipper, and walking foot
Free Arm	Convertible for sewing sleeves and cuffs

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove packaging materials and protective covers.
Attach power cord to machine and plug into AC outlet.
Install foot controller into designated port.
Wind and insert bobbin following threading diagram.
Thread upper thread using automatic needle threader.
Select straight stitch for initial testing.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

Basic Operation

Power on machine; follow setup procedures.

Select stitch: Use stitch selection dial or buttons.
Adjust settings: Use LCD display to set stitch length and width.
Position fabric: Lower presser foot lever.
Start sewing: Press foot controller or start/stop button.
Reverse stitching: Hold reverse button for reinforcement.
Thread cutting: Press automatic thread cutter when finished.

CAUTION! Always use correct needle for fabric type. Replace bent or dull needles immediately.

Specifications

Stitches: 70 built-in stitches including 10 auto-size buttonholes
Needle Positions: Adjustable left/right needle position
Stitch Length: 0-5mm adjustable
Stitch Width: 0-7mm adjustable
Bobbin: Drop-in top loading with jam-resistant system
Presser Feet: 7 included presser feet for various applications
Display: LCD with stitch information and settings
Power Source: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Functions

Access functions via control panel and LCD display. Front Panel: Power switch, stitch selection buttons, reverse stitch button, needle up/down button.

LCD Display: Shows selected stitch number, recommended foot, stitch length, stitch width, and other settings.

Stitch Adjustment: Length (0-5mm), Width (0-7mm), Mirror imaging, Twin needle capability. Utility Functions: Automatic thread cutter, Speed control slider, Start/stop button, Thread tension dial.

Stitch Selection

70 built-in stitches including utility, decorative, and quilting stitches.

Basic Stitches: Straight stitch, zigzag, stretch stitches
Decorative Stitches: Scallop, feather, cross, and hem stitches
Buttonholes: 10 one-step automatic buttonhole styles
Quilting Stitches: Specialty stitches for quilt piecing
Monogramming: 3 built-in fonts for personalization

Tip: Refer to stitch chart for recommended settings and applications.

Threading & Bobbin

Automatic needle threader and drop-in bobbin system.

Upper Threading: Follow numbered threading path on machine
Needle Threader: Push lever down and pull thread through needle eye
Bobbin Winding: Place thread on spool pin and wind bobbin
Bobbin Insertion: Drop bobbin into case with thread clockwise
Thread Pick-up: Bring bobbin thread up through needle plate

WARNING! Always raise needle to highest position before threading.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Remove lint from bobbin area and feed dogs
Weekly: Oil hook race and moving parts as directed
Monthly: Clean tension discs and thread path
As Needed: Replace needle after 8-10 hours of sewing

CAUTION! Unplug machine before cleaning or maintenance.

Accessories

Included accessories for various sewing applications.

Accessory	Use
Zigzag Foot	General sewing
Buttonhole Foot	Automatic buttonholes
Zipper Foot	Zipper insertion
Button Sewing Foot	Attaching buttons
Overcasting Foot	Finishing fabric edges
Monogramming Foot	Embroidery and monogramming
Walking Foot	Even feeding for quilting

Safety Information

Important safety precautions for machine operation.

Always unplug machine when changing needles or cleaning
Keep fingers away from moving parts and needle
Use proper needle size and type for fabric
Do not pull fabric while sewing
Keep work area well-lit and ventilated
Store machine in dry location when not in use

Troubleshooting

Symptom	Possible Cause	Corrective Action
Needle breaks	Incorrect needle/bent needle	Replace needle; ensure proper insertion
Thread bunching	Incorrect threading/tension	Re-thread machine; adjust tension
Skip stitches	Dull needle/wrong needle type	Replace needle; use correct needle for fabric
Machine jams	Lint buildup/thread tangle	Clean bobbin area; remove tangled thread
Uneven stitches	Tension issues/thread quality	Adjust tension; use quality thread
No power	Power cord/pedal connection	Check power connections; test outlet

Reset: Turn machine off and on to reset computer functions.

Service: 1-877-467-4289; www.brother-usa.com