Manual for Brother LX2500 Sewing Machine

The Brother LX2500 is a versatile mechanical sewing machine with 25 built-in stitches, 4-step buttonhole, automatic needle threader, drop-in bobbin system, free arm capability, adjustable stitch length and width, built-in LED light, and easy stitch selection dial. Powered by 120V AC, this machine is ideal for beginners and experienced sewers alike. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing machine with 25 built-in stitches, stitch selection dial, automatic needle threader, drop-in bobbin system, free arm, LED light, and foot pedal control.

Unpacking and Setup

Unpack and inspect contents. Place on stable surface at comfortable height.

1. Remove machine from packaging: Lift machine by handle, remove all protective materials.
2. Attach foot pedal: Connect foot pedal cord to machine port.
3. Plug into power: Connect power cord to machine and wall outlet (120V AC).
4. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
5. Wind bobbin: Place thread on spool pin, follow bobbin winding guide.

WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

First-Time Operation

Power on machine; follow setup steps for initial use.

1. Thread upper thread: Follow numbered threading guide on machine.
2. Use automatic needle threader: Push lever down to thread needle automatically.
3. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
4. Pull up bobbin thread: Hold upper thread, turn handwheel toward you.
5. Select stitch: Turn stitch selection dial to desired pattern.
6. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always start with needle at highest position. Keep work area well-lit.

Specifications

• Stitches: 25 built-in stitches
• Buttonhole: 4-step automatic
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Needle System: HA-1, 130/705 H
• Bobbin: Class 15 transparent
• Max Sewing Speed: 800 stitches per minute
• Lighting: Built-in LED
• Power Supply: 120V AC, 60Hz
• Machine Weight: 12.1 lbs (5.5 kg)

Controls and Settings

Main controls located on front and top of machine. Stitch Selection Dial: Turn to select from 25 built-in stitches. Stitch Length Dial: Adjust from 0-4mm (0 for darning). Stitch Width Dial: Adjust up to 5mm for zigzag and decorative stitches.

Additional Controls: Reverse Sewing Lever, Handwheel, Bobbin Winder, Spool Pins, Thread Tension Dial, Presser Foot Lever.

Stitch Settings: Straight stitch (position 1), Zigzag stitch (position 2-5), Blind hem stitch (position 6), Elastic stitch (position 7), Decorative stitches (positions 8-25). Tension: Adjust thread tension dial (3-5 for normal sewing).

Stitch Selection

Turn stitch selection dial to choose from 25 built-in stitches:

1. Straight stitch (left needle position)
2. Straight stitch (center needle position)
3. Zigzag stitch
4. Three-step zigzag
5. Blind hem stitch
6. Elastic stitch
7. Stretch overedge stitch
8. Shell tuck stitch
9. Scallop stitch
10. Multiple decorative stitches (positions 10-25)

Tip: Always test stitch on scrap fabric before sewing project.

Basic Sewing Techniques

Follow these steps for successful sewing projects:

1. Prepare fabric: Press and pin if necessary.
2. Select appropriate stitch and settings for fabric type.
3. Position fabric under presser foot, lower presser foot lever.
4. Start sewing: Press foot pedal gently to begin.
5. Guide fabric: Let machine feed fabric; don't pull or push.
6. Reverse stitching: Hold reverse lever to reinforce beginning and end.
7. Finishing: Raise needle, lift presser foot, remove fabric, trim threads.
8. Buttonholes: Use 4-step buttonhole function with buttonhole foot.

WARNING! Never sew over pins. Keep fingers clear of moving needle.

Maintenance & Cleaning

Regular maintenance ensures optimal performance. Unplug machine before cleaning.

1. Clean bobbin area: Remove bobbin case and clean with brush.
2. Oil machine: Apply sewing machine oil to designated points as needed.
3. Clean feed dogs: Use brush to remove lint and threads.
4. Needle replacement: Change needle after every project or 8 hours of sewing.
5. Cover machine: Use dust cover when not in use.

CAUTION! Use only sewing machine oil. Do not use household oils.

Accessories

Standard accessories included with Brother LX2500:

Warranty Information

Brother International Corporation provides limited warranty. 25-year limited warranty for mechanical components. 2-year limited warranty for electronic components. For warranty service, contact authorized Brother service center. Keep original receipt as proof of purchase. For support, visit www.brother-usa.com or contact 1-877-467-4289.

Troubleshooting

Service: 1-877-467-4289; www.brother-usa.com